• Replacement sight glass tubes for Sabco BrewMagic systems

    These are replacement sight glass tubes for the BrewMagic V350 system. These sight glass tubes fit the boil kettle and the HLT. Sold in packages of 2.
  • Stainless steel adapter - 3/8" ID hose barb to 1/2" or 3/4" tri-clamp

    Use this barb when you need to connect 3/8" ID hose or tubing to a 1/2" or 3/4" tri-clamp. We use this on our dual regulator to push COinto a fermenter or bright tank.
  • Tri-Clamp thermometer for brewers

    This is a very high quality thermometer with tri-clamp connection. Features include:
    • Large 3" dial with bold, bright characters for easy reading
    • Case, bezel and stem in 304 SS
    • Tri-clamp connection in your choice of either 3/4" or 1.5"
    • F° & C° in bold easy-to-read numerals
    • Solid metal construction with stainless probe
    • Hermetically sealed glass lens
    • Easy calibration using screw on back of dial body
    • Accuracy of +/-1% of full scale
    • Tri-clamp gasket included
    • Stem length on 1.5" TC version is 1-13/16"
    • Stem length on the 3/4" TC version is 1-5/16"
  • Keg Valve Lock Rings for Micromatic Sankey Valves

    These spiral, stainless steel lock rings (also known as snap rings or retaining rings) will secure a Micromatic valve into the D-system, drop-in Sankey neck. Keep these on the shelf to ensure your kegs stay in service. These rings are specifically designed to fit certain valve types. Do not substitute them for other designs! Valves can be pressurized and must be properly secured within the keg neck for safety. Remove and install using a valve removal tool and lock ring knife (sold separately, links below) Sold in packages of 25. For example, ordering a quantity of 2 will give you 50 lock rings.
  • Sabco Carb Wand

    $100.00$135.00
    This is the best way to carbonate using your Sabco Bright vessels. You can also turn your Sabco Fermenter into a Bright tank. The Carb Wand can be inserted into your Sabco Fermenter or Bright using the 3/4" tri-clamp port in the top. Then, connect a bottle of COfor carbonating or oxygen for aerating. The 0.5 micron stone on the Carb Wand will get the job done quickly. For older Sabco Fermenters without the tri-clamp ports in the cap, purchase this Carb Wand along with the new Fermenter cap (see link below). Made of 304 SS. Includes shut-off valve and brass 5/16" barb.
  • This is a tri-clamp kit, including 2 clamps and 2 gaskets. Out tri-clamps are heavy-duty and higher quality than a lot of what you'll find out there. Other sizes are available, as well. Look for links below.
  • Stainless steel keg coupler ball valve

    This ball valve has a keg coupler thread and is used to stop beer flow from a standard keg coupler. This thread will not fit a 1/2" outlet.
  • 1/2" & 3/4" tri-clamp Buna gaskets for brewing and other sanitary applications

    This is a package of 5 buna gaskets for tri-clamps. Choose size 1/2" or 3/4" ID hose sizes below. These are the very same gaskets that you will find on most tri-clamp connections on Sabco equipment.
  • Beer & beverage serving kegs, conditioning, carbonating, bright tanks

    The Sabco Bright Vessel is a lot of things. It is for conditioning beer, dry hopping, storing beer, carbonating beer and serving beer. The Sankey valve makes it a perfect keg for serving. Use it under the bar in your tap room or restaurant. Use it in your kegerator at home. The 4" tri-clamp port makes it easy to clean, too. The Sankey valve is centered in the removable cap making it compatible with most keg washing machines. Additional features include:
    • Sanitary design, no threads or bulkhead fittings
    • Includes a pressure relief valve (60 psi) with pull-ring so you can vent pressure easily
    • 4" tri-clamp cap can be easily removed, allowing you to pull the Sankey valve out for cleaning
    • Easily fill straight from your Sabco Fermenter
    • Lightweight, 33 pounds
    • 1/2 bbl keg is certified for correct volume to help you comply with regulations
    • Easy to add a Carb Wand (sold separately) to the 1/2 bbl Sabco Bright
    • Made of 304 SS
    • Vessel has a safety burst disk on the bottom dome for your protection in case of accidental high pressure
    • 1/2" tri-clamp port included
  • Wash Head Tap Keg Coupler for Filling & Cleaning

    Compare this wash head coupler to standard couplers:
    • Standard couplers have a small COinlet. This coupler is large on both the gas and the beer side.
    • Standard couplers have a check valve at either the inlet or outlet port. This coupler does not.
    • Includes a shut-off ball valve at each port, allowing you to quickly turn off the source and move on to the next keg.
    • Makes it easy to clean kegs upside-down.
    • Easy to fill kegs either upright or upside-down.
    • Includes hose barbs on each port for easy connection. Fits 1/2" ID hose.
  • Beer Keg Caps for Sankey Valves

    This is a box of 2,000 keg caps. Choose your color. Made of durable plastic in bright colors. Vented, too. Sabco's keg caps are the very best available and are very popular nationally. Designed for use with standard Sankey valves and keg necks. They keep dirt and debris out of the keg prior to distribution and use.
  • Beer Keg Valve Removal Press Tool

    Very useful tool for removal of North American, D-System Micromatic keg valves. Made of solid stainless steel, this removal tool is not messing around. Other useful keg tools and replacement parts are shown below.
  • Keg maintenance supplies - lock ring removal knife

    These knives help you remove the snap-ring that secures North American keg valves. Ordering quantity of 1 gives you a package of 3 knives. Valve removal tool sold separately. See link below