For any brew system assistance whatsoever –
call or text Jim Sulier at 419-871-5747

System Components
Parts & Accessories
Kegging Supplies and Services

  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts.
    • Gasket adhesive
    • Port gasket
    • Flow gasket
    • 4-hole plate
    • 2-hole top plate
    Add to cart Details
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts.
    • Gasket adhesive
    • Port gasket
    • Flow gasket
    • 4-hole plate
    • 2-hole bottom plate
    Add to cart Details
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts.
    • Gasket adhesive
    • Port gasket
    • Flow gasket
    • 2-hole top plate
    • 2-hole bottom plate
    Add to cart Details
  • Replacement port gasket for PlatePro. It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts.
    • Gasket adhesive
    • Flow gasket
    • 4-hole plate
    • 2-hole top plate
    • 2-hole bottom plate
    Add to cart Details
  • Replacement flow gasket for PlatePro. It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts.
    • Gasket adhesive
    • Port gasket
    • 4-hole plate
    • 2-hole top plate
    • 2-hole bottom plate
    Add to cart Details
  • Designed for use with household natural gas pressure this cast-iron banjo style burner will produce approx. 30,000 Btu of heating energy. Perfect for your 10-30 gallon mash tun or outdoor cooking. This unit comes with a standard natural gas orifice but can be exchanged for an LP gas orifice. Choose option above. Be advised that when using bottle LP gas that you will need a regulator that will reduce inlet pressure to approx. 11" WC (water column) for best combustion efficiency.
    • 9.2" overall length without orifice
    • 6" burner diameter
    • 4 lbs. cast iron
    • Bracket screw located on the center back side
    • Orifice has 3/8" brass elbow flared connection to fit most gas supply hosing
    • Variable air-mix vent which is used to tune the incoming air and adjust for the most efficient flame
    Select options Details
  • Designed for use with household natural gas pressure this cast-iron banjo style burner will produce approx. 60,000 Btu of heating energy. Perfect for your 10-30gal boil, or HLT kettle. This unit comes with a standard natural gas orifice but can be exchanged for an LP gas orifice. Choose option above. Be advised that when using bottle LP gas that you will need a regulator that will reduce inlet pressure to approx. 11" WC (water column) for best combustion efficiency.
    • 15.5" overall length
    • 10" burner diameter
    • 14 lbs. cast iron
    • 4 bracket screw locations
    • Orifice has 3/8" straight brass flared connection to fit most gas supply hosing
    • Variable air-mix vent which is used to tune the incoming air and adjust for the most efficient flame
    Select options Details
  • BrewMagic Pilot is a 30-gallon system built on the tried-and-true BrewMagic platform. We have gone all stainless, increased batch capacity, boosted the pump and enlarged the touch-screen. The system is ideal for:
    • Serious home brewers
    • Friends who brew together and each want to keep 10 or 12 gallons
    • Pilot brewing and recipe development
    • Nano brewery startups
    • College and university brewing science programs
    Insanely high quality and repeatability have been our claim to fame for almost 30 years. We produced the first commercial-grade RIMS system and have thousands of BrewMagic™ systems in service around the world. Our reputation precedes us, so you can understand why we were so careful about introducing this new system. Our goal was to increase capacity and add features without sacrificing anything. BrewMagic™ Pilot is the result.
    • RIMS (recirculating infusion mash system)
    • All-stainless construction
    • 3-vessel design – Hot liquor, mash tun and boil kettle
    • Sanitary, food-grade welding without threaded fittings
    • 80,000 BTU low-pressure jet burners with electronic igniters
    • Tri-clamp fittings, no soft plumbing
    • Precise temperature control without scorching or caramelization
    • Brew 10-25 gallon batch sizes
    • Digital temperature readout on all 3 vessels
    • 7-inch color touch-screen control
    • Powerful March TE pump
    • Sight glass for mash
    • Recipe storage for mash and boil with visual and audible prompts
    • Network and WiFi capable
    If you’d prefer a full written quote from one of our brewing experts click here to customize your system or call 419-531-4347 to speak with a brewing system expert today.
    Select options Details
  • This LP hose will connect your propane bottle to your BreMagic system. It includes a 1/4" NPT male thread for connecting to the regulator on your BrewMagic V350 system. The other end connects to 20-pound North American LP bottles. Please note this hose will not work with most LP bottles outside North America.
    Add to cart Details
  • Say goodbye to Corneys!

    Finally... A 5-gallon serving keg that's economical, easy to clean and compatible with North American Sankey equipment. This is a 1/6 barrel keg with a North American Sankey valve and spear installed in a 4" tri-clamp cap. Homebrewers can easily clean these kegs without sacrificing sanitary fittings. Slightly more expensive than Corney kegs but with lots of features:
    • 1/6 bbl (5.16 gal) stainless steel keg
    • 4" tri-clamp, sanitary cap with tamper resistant closure for safety
    • Includes drop-in, Sankey D-system valve
    • 60 psi, pull-ring pressure relief valve with sanitary o-ring closure so beer does not touch threads
    • Easy to extract the valve and PRV assembly for cleaning - the entire valve assembly can be taken directly to your sink for cleanup
    • Simple upside down, manual or automated clean out
    Everyone needs a few PubJugs. They are great for bars and restaurants serving many different beverages:
    • Cold-brew coffee
    • Signature cocktails and margaritas in restaurants and bars
    • Wine
    Add to cart Details
  • This valve utilizes a non-restrictive full bore for maximum 3/4"  flow without clogging.  Many sanitary valves are not constructed with this advantage. It can be fully disassembled for cleaning and inspection. Use it with any TC connection to or from your brewery components. The TC ferrule face is 1" in diameter. This is the same for both 1/2" and 3/4" tri-clamp fittings. That means you can use the same clamp for both valves. Don't forget to order gaskets and tri-clamps separately.
    Add to cart Details
  • Use this adapter to modify the female end of a Micromatic shut-off valve to accept your 1/2" tri-clamp hoses. It is also perfect for adding a shut-off valve between two tri-clamp hoses. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
    Details
  • Unitanks from Sabco are affordable and rich in features.
    • Fully jacketed for cooling
    • Insulated
    • Clean-in-place ready
    • Top manway
    • Thermowell
    • Bottom outlet with butterfly valve for yeast cropping
    • Adjustable rotating arm with butterfly valve for racking
    • Sight tube
    • Includes adjustable pressure relief valve and vacuum breaker
    • CIP spray ball
    • Carbonation port with removable stainless steel stone
    Select options Details
  • Use this adapter to connect any 1/2" or 3/4" tri-clamp to the male end of a garden hose. Use your imagination. This could be handy for connecting a garden hose to just about every Sabco vessel and fitting.
    Add to cart Details
  • Food-grade 3/8" ID tubing designed for beverage use. Very easy to clean. Not approved for boiling temperatures. Tubing is sold in lengths of 10 ft. Example: to buy 20 feet, order a quantity of 2. Great for use as a blowoff tube on your fermenter.
    Add to cart Details
  • This is a complete Tri-Clamp assembly for performing your own installation of a 4" sanitary port on any vessel. Includes:
    • 4" tri-clamp long ferrule, 304 SS
    • 4" tri-clamp with heavy turn bolt, 304 SS
    • 4" tri-clamp cap, 304 SS
    • 4" buna tri-clamp gasket
    Add to cart Details
  • This kit includes a 4" tri-clamp and a buna gasket. Clamp is solid 304 SS with a heavy-turn bolt.
    Add to cart Details
  • Get a better view with out adjustable-angle tri-clamp thermometer.  It's adjustable from straight angle all the way to a 60° angle. Features include:
    • Large 3″ dial with bold, bright characters for easy reading
    • Case, bezel and stem in 304 SS
    • Tri-clamp connection in your choice of either 3/4" or 1.5"
    • F° & C° in bold easy-to-read numerals
    • Solid metal construction with stainless probe
    • Hermetically sealed glass lens
    • Easy calibration using screw on back of dial body
    • Accuracy of +/- 1% of full scale
    • Tri-clamp gasket included
    Select options Details
  • For any brew system assistance whatsoever - call or text Jim Sulier at 419-871-5747
    BrewMagic Pilot is a 56-gallon system built on the tried-and-true BrewMagic platform. We have gone all stainless, increased batch capacity, boosted the pump and enlarged the touch-screen. The system is ideal for:
    • Startup breweries
    • Brewpubs
    • Pilot brewing and recipe development
    • Nano brewery startups
    • College and university brewing science programs
    Insanely high quality and repeatability have been our claim to fame for almost 30 years. We produced the first commercial-grade RIMS system and have thousands of BrewMagic™ systems in service around the world. BrewMagic® Pro includes the following features:
    • RIMS (recirculating infusion mash system)
    • All-stainless construction
    • 3-vessel design – Hot liquor, mash tun and boil kettle
    • Sanitary, food-grade welding without threaded fittings
    • 80,000 BTU low-pressure jet burners with electronic igniters
    • Tri-clamp fittings, no soft plumbing
    • Precise temperature control without scorching or caramelization
    • Brew 10-50 gallon batch sizes
    • Digital temperature readout on all 3 vessels
    • 7-inch color touch-screen control
    • 2 powerful March TE pumps
    • Sight glass for mash
    • Recipe storage for mash and boil with visual and audible prompts
    • Network and WiFi capable
    Receive A Custom Quote from A Brewing Expert
    Select options Details
  • Sabco jet burners are not messing around. This burner is rated at 120,000 BTU. It measures 8" in diameter, weighs 4.6 pounds and has 2 types of built-in brackets for adapting igniters. Gas pipe connection is 1/2" NPT. Designed for low pressure. Natural gas supplies are typically already low pressure but bottled propane will need to be regulated below 11" water column for these burners.
    Select options Details
  • Sabco jet burners are not messing around. This burner is rated at 60,000 BTU. It measures 5 5/8" in diameter, weighs 2.6 pounds and has a built-in bracket for adapting igniters. Gas pipe connection is 3/8" NPT. Designed for low pressure. Natural gas supplies are typically already low pressure but bottled propane will need to be regulated below 11" water column for these burners.  
    Select options Details
  • Stainless steel chamber for low-density heating element. No threads. All sanitary welding by the best welders around. Constructed of 304 SS, 15.13"L, 1.38"ID, 1.5" tri-clamp connection. Wort in/out tubing is 0.5"OD. Heating element sold separately. See link below.
    Add to cart Details
  • Do you have a false bottom in your BrewMagic V350 kettle? Consider converting to a whirlpool siphon. It's easy to manually create a whirlpool in the small kettle on a BrewMagic V350 system if you have this tri-clamp siphon. After knockout, rotate your spoon around the perimeter of the kettle to turn the wort and create a cone of trub. You'll leave that stuff behind instead of clogging up your ChillWizard or transferring it to your fermenter. Made of 304 SS and sanitary welded with a tri-clamp connection.
    Add to cart Details
  • These adapters are perfect for making any 3/4" to  1=1/2" TC connection
    Select options Details