[wcas-search-form]

  • Professional-grade beer brewing system for home brewers

    BrewMagic Presto is a commercial-grade brewing system for home brewers and aspiring professional brewers. This system will level-up your home brewing skills with tri-clamp fittings, sanitary welds, accurate temperature control and a touchscreen with recipe features. Brew on any surface with this electric, 3-vessel brewing system. Sabco has perfected RIMS which leaves you with a true, dedicated hot liquor tank so you are ready to clean or mash in a second batch. No scorching, no temperature stratification. Hit step mash and mash out temperatures with the touch of a button. Program your HLT to maintain a set temperature during the entire brew day so you’re always ready for the next step. The control system is installed with touchscreen, pump and RIMS heater on a stainless steel bracket. No need to figure out how to mount the control box. Just place it on the floor, countertop, workbench, whatever. You’ll be able to easily read the digital temperature readout of all three vessels simultaneously. Brew batch sizes between 5 and 17 gallons at one time. Sabco supplies the power cord with a NEMA 14-50P plug. You supply a 220-240 Volt, 50 Amp circuit. This plug can be replaced with a NEMA L6-30P plug (only needs 30 Amp circuit) if you do not need double-batch capability. HLT and boil heaters include NEMA L6-30 plugs that are attached to the control system. This is much safer and durable than putting plugs directly on the heaters in close proximity to liquids.

    Place an order for any BrewMagic system with only 50% down payment. Contact Sabco to start your order.

  • PubJug beer and beverage serving kegs

    Say goodbye to Corneys! PubJugs kegs with a North American Sankey valve and spear installed in a 4" tri-clamp cap. This makes them the perfect keg for serving many beverages. Dispense beer, cold brew coffee, cocktails, margaritas, wine, kombucha and more. Now available in two sizes! 1/2 bbl (about 15.5 gallon) and 1/6 bbl (about 5.75 gallon). Finally... A serving keg that's economical, easy to clean and compatible with North American Sankey equipment. Homebrewers can easily clean these kegs without sacrificing sanitary fittings. Slightly more expensive than Corney kegs but with lots of features:
    • 1/2 bbl (15.5 gal) stainless steel keg sizes available
    • 4" tri-clamp, sanitary cap with tamper resistant closure for safety
    • Includes drop-in, Sankey D-system valve
    • 60 psi, pull-ring pressure relief valve with sanitary o-ring closure so beer does not touch threads
    • Easy to extract the valve and PRV assembly for cleaning - the entire valve assembly can be taken directly to your sink for cleanup
    • Simple upside down, manual, or automated clean out
    Everyone needs a few PubJugs. They are great for bars and restaurants serving many different beverages:
    • Cold-brew coffee
    • Signature cocktails and margaritas in restaurants and bars
    • Wine
    Please note the Sankey valve is NOT centered in the removable cap. This makes PubJug incompatible with some keg washing equipment.
  • Sight Glass

    $80.00$140.00

    Small sight glass with sanitary tri-clamp fittings

    This small brewing sight glass is durable and sanitary. Notice the thickness of top and bottom plates. Easy to take apart for cleaning. Available as either sight glass only or as a kit designed to retrofit older BrewMagic V350 models that used a plastic tube as sight glass on mash inlet. You can connect this sight glass with a 1/2" or 3/4" tri-clamp connection.
  • PubJug beer and beverage serving kegs

    Say goodbye to Corneys! PubJugs are kegs with a North American Sankey valve and spear installed in a 4" tri-clamp cap. This makes them the perfect keg for serving many beverages. Dispense beer, cold brew coffee, cocktails, margaritas, wine, kombucha and more. Now available in two sizes! 1/2 bbl (about 15.5 gallon) and 1/6 bbl (about 5.75 gallon). Finally... A serving keg that's economical, easy to clean and compatible with North American Sankey equipment. Homebrewers can easily clean these kegs without sacrificing sanitary fittings. Slightly more expensive than Corney kegs but with lots of features:
    • 1/2 bbl (15.5 gal) stainless steel keg sizes available
    • 4" tri-clamp, sanitary cap with tamper resistant closure for safety
    • Includes drop-in, Sankey D-system valve
    • 60 psi, pull-ring pressure relief valve with sanitary o-ring closure so beer does not touch threads
    • Easy to extract the valve and PRV assembly for cleaning - the entire valve assembly can be taken directly to your sink for cleanup
    • Simple upside down, manual, or automated clean out
    Everyone needs a few PubJugs. They are great for bars and restaurants serving many different beverages:
    • Cold-brew coffee
    • Signature cocktails and margaritas in restaurants and bars
    • Wine
    Please note the Sankey valve is NOT centered in the removable cap. This makes PubJug incompatible with some keg washing equipment.
  • Stainless steel 8" Tri-Clamp Compatible Long Ferrule

    We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • 8" Tri-Clamp Buna Gasket

    We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • Stainless Steel 8" Tri-Clamp cap

    8" Tri-Clamp compatible cap. All stainless. We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • Stainless steel 8" tri-clamp for sanitary fittings in a brewery

    8" Tri-Clamp. All stainless. We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order for clearance items.
  • Replacement start gasket for PlatePro. These are sold in packages of 2. For example, ordering quantity 1 will give you 2 gaskets.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packages of 2. For example, ordering quantity 1 will give you 2 plates.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packs of 2. For example, ordering quantity 1 will give you 2 plates.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packs of 6. For example, ordering quantity 1 will give you 6 plates.
  • Replacement port gasket for PlatePro. These gaskets come in a package of 2 pieces. For example, ordering quantity 1 will give you 2 gaskets.
  • Replacement flow gasket for PlatePro. These are sold in packages of 6. For example, ordering quantity 1 will give you 6 gaskets
  • Designed for use with household natural gas pressure this cast-iron banjo style burner will produce approx. 30,000 Btu of heating energy. Perfect for your 10-30 gallon mash tun or outdoor cooking. This unit comes with a standard natural gas orifice but can be exchanged for an LP gas orifice. Choose option above. Be advised that when using bottle LP gas that you will need a regulator that will reduce inlet pressure to approx. 11" WC (water column) for best combustion efficiency.
    • 9.2" overall length without orifice
    • 6" burner diameter
    • 4 lbs. cast iron
    • Bracket screw located on the center back side
    • Orifice has 3/8" brass elbow flared connection to fit most gas supply hosing
    • Variable air-mix vent which is used to tune the incoming air and adjust for the most efficient flame
  • BrewMagic® Pilot RIMS System

    $7,450.00$9,450.00

    Stainless steel beer brewing system brewhouse

    BrewMagic Pilot is available in electric or gas. Choose your size - 20 gallons or 30 gallons. It's still built on the tried-and-true BrewMagic platform but we have gone all stainless, increased batch capacity, boosted the pump and enlarged the touch-screen. The system is ideal for:
    • Serious home brewers
    • Friends who brew together and each want to keep 10 or 12 gallons
    • Pilot brewing and recipe development
    • Nano brewery startups
    • College and university brewing science programs
    Insanely high quality and repeatability have been our claim to fame for almost 30 years. We produced the first commercial-grade RIMS system and have thousands of BrewMagic™ systems in service around the world. Our reputation precedes us, so you can understand why we were so careful about introducing this new system. Our goal was to increase capacity and add features without sacrificing anything. BrewMagic™ Pilot is the result.
    • RIMS (recirculating infusion mash system)
    • All-stainless construction
    • 3-vessel design – Hot liquor, mash tun and boil kettle
    • Sanitary, food-grade welding without threaded fittings
    • 80,000 BTU low-pressure jet burners with electronic igniters
    • Tri-clamp fittings, no soft plumbing
    • Precise temperature control without scorching or caramelization
    • Brew 10-25 gallon batch sizes
    • Digital temperature readout on all 3 vessels
    • 7-inch color touch-screen control
    • Powerful March TE pump
    • Sight glass for mash
    • Recipe storage for mash and boil with visual and audible prompts
    • Network and WiFi capable
    If you’d prefer a full written quote from one of our brewing experts click here to customize your system or call 419-531-5347 to speak with a brewing system expert today.
       
  • Stainless steel adapter - Coupler thread to 1/2" tri-clamp

    Use this adapter to modify the female end of a Micro Matic shut-off valve to accept your 1/2" tri-clamp hoses. It is also perfect for adding a shut-off valve between two tri-clamp hoses. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
  • Stainless steel jacketed unitank fermenters and brites

    Stainless steel unitanks from Sabco are affordable and rich in features.
    • Fully jacketed for cooling
    • Insulated
    • Clean-in-place ready
    • Top manway
    • Thermowell
    • Bottom outlet with butterfly valve for yeast cropping
    • Adjustable rotating arm with butterfly valve for racking
    • Sight tube
    • Includes adjustable pressure relief valve and vacuum breaker
    • CIP spray ball
    • Carbonation port with removable stainless steel stone
  • Adapter - garden hose to sanitary 1/2" or 3/4" tri-clamp

    Use this adapter to connect any 1/2" or 3/4" tri-clamp to the male end of a garden hose. Use your imagination. This could be handy for connecting a garden hose to just about every Sabco vessel and fitting.
  • Food-grade 3/8" ID tubing designed for beverage use

    Very easy to clean. Not approved for boiling temperatures. Tubing is sold in lengths of 10 ft. Example: to buy 20 feet, order a quantity of 2. Great for use as a blowoff tube on your fermenter.
  • 4 Inch Sanitary Port Assembly

    This is a complete Tri-Clamp assembly for performing your own installation of a 4" sanitary port on any vessel. Includes:
    • 4" tri-clamp long ferrule, 304 SS
    • 4" tri-clamp with heavy turn bolt, 304 SS
    • 4" tri-clamp cap, 304 SS
    • 4" buna tri-clamp gasket
  • 4 Inch Stainless Steel Tri-Clamp Kit with Clamp & Gasket

    This kit includes a 4" tri-clamp and a buna gasket. Clamp is solid 304 SS with a heavy-turn bolt.
  • Tri-Clamp thermometer for brewers

    Get a better view with our adjustable-angle tri-clamp thermometer.  It's adjustable from straight angle all the way to a 60° angle. Features include:
    • Large 3″ dial with bold, bright characters for easy reading
    • Case, bezel and stem in 304 SS
    • Tri-clamp connection in your choice of either 3/4" or 1.5"
    • F° & C° in bold easy-to-read numerals
    • Solid metal construction with stainless probe
    • Hermetically sealed glass lens
    • Easy calibration using screw on back of dial body
    • Accuracy of +/- 1% of full scale
    • Tri-clamp gasket included
  • Stainless steel beer brewing system brewhouse

    BrewMagic Pilot is a 56-gallon system built on the tried-and-true BrewMagic platform. We have gone all stainless, increased batch capacity, boosted the pump and enlarged the touch-screen.
    The system is ideal for:
    • Startup breweries
    • Brewpubs
    • Pilot brewing and recipe development
    • Nano brewery startups
    • College and university brewing science programs
    Insanely high quality and repeatability have been our claim to fame for almost 30 years. We produced the first commercial-grade RIMS system and have thousands of BrewMagic™ systems in service around the world. BrewMagic® Pro includes the following features:
    • RIMS (recirculating infusion mash system)
    • All-stainless construction
    • 3-vessel design – Hot liquor, mash tun and boil kettle
    • Sanitary, food-grade welding without threaded fittings
    • 80,000 BTU low-pressure jet burners with electronic igniters
    • Tri-clamp fittings, no soft plumbing
    • Precise temperature control without scorching or caramelization
    • Brew 10-50 gallon batch sizes
    • Digital temperature readout on all 3 vessels
    • 7-inch color touch-screen control
    • 2 powerful March TE pumps
    • Sight glass for mash
    • Recipe storage for mash and boil with visual and audible prompts
    • Network and WiFi capable

    Place an order for any BrewMagic system with only 50% down payment. Contact Sabco to start your order.