[wcas-search-form]

  • Stainless Steel Boil kettle whirlpool siphon for beer brewing

    Do you have a false bottom in your BrewMagic V350 kettle? Consider converting to a whirlpool siphon. It's easy to manually create a whirlpool in the small kettle on a BrewMagic V350 system if you have this tri-clamp siphon. After knockout, rotate your spoon around the perimeter of the kettle to turn the wort and create a cone of trub. You'll leave that stuff behind instead of clogging up your ChillWizard or transferring it to your fermenter. Made of 304 SS and sanitary welded with a tri-clamp connection.
  • Wash Head Tap Keg Coupler for Filling & Cleaning

    Compare this wash head coupler to standard couplers:
    • Standard couplers have a small COinlet. This coupler is large on both the gas and the beer side.
    • Standard couplers have a check valve at either the inlet or outlet port. This coupler does not.
    • Includes a shut-off ball valve at each port, allowing you to quickly turn off the source and move on to the next keg.
    • Makes it easy to clean kegs upside-down.
    • Easy to fill kegs either upright or upside-down.
    • Includes hose barbs on each port for easy connection. Fits 1/2" ID hose.
  • Stainless steel jacketed unitank fermenters and brites

    Stainless steel unitanks from Sabco are affordable and rich in features.
    • Fully jacketed for cooling
    • Insulated
    • Clean-in-place ready
    • Top manway
    • Thermowell
    • Bottom outlet with butterfly valve for yeast cropping
    • Adjustable rotating arm with butterfly valve for racking
    • Sight tube
    • Includes adjustable pressure relief valve and vacuum breaker
    • CIP spray ball
    • Carbonation port with removable stainless steel stone
  • Stainless steel tri-clamp thermowell for temperature reading

    This tri-clamp, sanitary thermowell can be used in place of the standard dial thermometer on your Sabco fermenter. Insert a temperature probe into the thermowell and connect it to a temperature controller. The thermowell connects easily to our Sabco fermenter. Just remove the tri-clamp thermometer and attach this. Specifications:
    • Connects via 1.5" tri-clamp
    • Will accept any type of probe with maximum OD of 1/4"
    • Made of 304 SS
    • Tube length is 9.25"
  • Tri-Clamp thermometer for brewers

    This is a very high quality thermometer with tri-clamp connection. Features include:
    • Large 3" dial with bold, bright characters for easy reading
    • Case, bezel and stem in 304 SS
    • Tri-clamp connection in your choice of either 3/4" or 1.5"
    • F° & C° in bold easy-to-read numerals
    • Solid metal construction with stainless probe
    • Hermetically sealed glass lens
    • Easy calibration using screw on back of dial body
    • Accuracy of +/-1% of full scale
    • Tri-clamp gasket included
    • Stem length on 1.5" TC version is 1-13/16"
    • Stem length on the 3/4" TC version is 1-5/16"
  • 1/2" tri-clamp Buna gaskets for brewing and other sanitary applications

    This is a package of 3 swivel gaskets. Swivel gaskets allow you to rotate a tri-clamp connection by simply loosening the clamp. The connection will rotate but not leak if you loosen the clamp slightly. Sized for 1/2" tri-clamp connections. Made of FDA hard teflon.
  • Stainless steel elbow with sanitary 1/2" tri-clamp ferrule

    This little 90° elbow is versatile and you will think of many ways to use it. Specifications:
    • Short radius, approximately 2.75" x 3.5"
    • Includes 1/2" tri-clamp ferrule
    • Will easily connect to any tri-clamp hose
    • Sanitary welded
    • Durable and heavy-duty
  • This is a tri-clamp kit, including 2 clamps and 2 gaskets. Out tri-clamps are heavy-duty and higher quality than a lot of what you'll find out there. Other sizes are available, as well. Look for links below.
  • Stainless steel tri-clamp elbow for wort plumbing

    This is a tri-clamp 90° elbow. The tri-clamp ferrules are 1/2". We use the small version on the top of our Sabco Fermenters to provide a stable mount for valves. We're sure you'll have other interesting ideas for them, too. We make these in two different sizes. The small elbow has a radius of 2 3/16". The large elbow has two different extension lengths. One is 3 3/8" and the other is 4".
  • Tri-Clamp Brewer Hose

    $70.00$76.00
    Brewer hose with tri-clamp fittings included. Don't purchase them all separately like some sort of fool. This hose is 5 feet long and allows you to make a quick, sanitary connection between tri-clamp components. We pre-assemble everything for you with brewer hose, tri-clamp ferrules, stainless steel hose clamps, tri-clamps and gaskets. You'll save money by buying these components as a kit.
  • Stainless steel adapter - 3/8" ID hose barb to 1/2" or 3/4" tri-clamp

    Use this barb when you need to connect 3/8" ID hose or tubing to a 1/2" or 3/4" tri-clamp. We use this on our dual regulator to push COinto a fermenter or bright tank.
  • Stainless steel Type-J thermocouple temperature sensor

    This is a stainless steel type-J thermocouple temperature sensor. It was used on BrewMagic V350 systems until 2013. If you are purchasing this as a replacement for the temperature sensor on your BrewMagic V350 system, please look carefully at what you currently have. If your temperature sensor has 2 wires, purchase this thermocouple. If your sensor has 3 wires, then you need to replace it with an RTD temperature sensor which can also be found on this site.
  • Silicone Tubing

    $75.00$80.00
    Silicone tubing is ideal for high temperatures. This tubing is rated for -100°F to 500°F. Perfect for moving wort out of your boil kettle. Meets FDA standards and is tasteless and odorless. Available in 1/2" and  3/4" ID. Tubing is sold in lengths of 10 feet. For example, ordering a quantity of 2 will give you 20 feet. Other specifications:
    • Working pressure up to 10 psi
    • Odorless, tasteless and inert
    • Good insulating properties
    • Resists deterioration from ultraviolet light
    • NSF 51 listed
  • Replacement sight glass tubes for Sabco BrewMagic systems

    These are replacement sight glass tubes for the BrewMagic V350 system. These sight glass tubes fit the boil kettle and the HLT. Sold in packages of 2.
  • Sight Glass

    $80.00$140.00

    Small sight glass with sanitary tri-clamp fittings

    This small brewing sight glass is durable and sanitary. Notice the thickness of top and bottom plates. Easy to take apart for cleaning. Available as either sight glass only or as a kit designed to retrofit older BrewMagic V350 models that used a plastic tube as sight glass on mash inlet. You can connect this sight glass with a 1/2" or 3/4" tri-clamp connection.
  • This kit gives you everything you need to turn a regular hose into a sanitary, tri-clamp hose. You'll receive 2 stainless tri-clamp ferrules and two stainless hose clamps.
  • The Dirty Gauge was invented by Steve Acord at Dirty Bucket Brewing Company in Woodinville, WA. This brilliant product accurately reads pressure during the carbonation process. You can attach the Dirty Gauge directly to the top of your Sabco Fermenter. Use this in conjunction with our carbonation stone and speed up the process considerably. Two options are available. The coupler thread option includes the gasket for the threaded nut. The tri-clamp option does not include a 1/2" tri-clamp gasket or clamp.
  • Sabco Carb Wand

    $100.00$135.00
    This is the best way to carbonate using your Sabco Bright vessels. You can also turn your Sabco Fermenter into a Bright tank. The Carb Wand can be inserted into your Sabco Fermenter or Bright using the 3/4" tri-clamp port in the top. Then, connect a bottle of COfor carbonating or oxygen for aerating. The 0.5 micron stone on the Carb Wand will get the job done quickly. For older Sabco Fermenters without the tri-clamp ports in the cap, purchase this Carb Wand along with the new Fermenter cap (see link below). Made of 304 SS. Includes shut-off valve and brass 5/16" barb.
  • Beer & beverage serving kegs, conditioning, carbonating, bright tanks

    The Sabco Bright Vessel is a lot of things. It is for conditioning beer, dry hopping, storing beer, carbonating beer and serving beer. The Sankey valve makes it a perfect keg for serving. Use it under the bar in your tap room or restaurant. Use it in your kegerator at home. The 4" tri-clamp port makes it easy to clean, too. The Sankey valve is centered in the removable cap making it compatible with most keg washing machines. Additional features include:
    • Sanitary design, no threads or bulkhead fittings
    • Includes a pressure relief valve (60 psi) with pull-ring so you can vent pressure easily
    • 4" tri-clamp cap can be easily removed, allowing you to pull the Sankey valve out for cleaning
    • Easily fill straight from your Sabco Fermenter
    • Lightweight, 33 pounds
    • 1/2 bbl keg is certified for correct volume to help you comply with regulations
    • Easy to add a Carb Wand (sold separately) to the 1/2 bbl Sabco Bright
    • Made of 304 SS
    • Vessel has a safety burst disk on the bottom dome for your protection in case of accidental high pressure
    • 1/2" tri-clamp port included
  • Stainless steel RTD temperature sensor for brewing

    This is the RTD temperature sensor used on all current BrewMagic systems. It was also used on V350 systems beginning in 2013. RTD sensors provide accurate temperature data to digital controllers such as those used on BrewMagic systems. These RTD sensors have the following specifications:
    • Made of 304 SS
    • 100 ohms
    • 3-wire design for increased accuracy
    • 1/4" diameter
    • 3" probe length
    • Relief spring at probe to prevent damage
    • 12 feet of armored cable for durability in harsh environments
    This RTD (resistance temperature detector) provides accurate and stable information to your V350 Brew-Magic controller.  This will replace the existing one in your Brew-Magic System If you are purchasing this as a replacement for the temperature sensor on your BrewMagic, please look carefully at what you currently have. If your temperature sensor has 3 wires, purchase this RTD. If your sensor has 2 wires, then you need to replace it with a type-J thermocouple which can also be found on this site.
  • Stainless steel chamber for RIMS beer brewing

    Stainless steel chamber for low-density heating element. No threads. All sanitary welding by the best welders around. Constructed of 304 SS, 15.13"L, 1.38"ID, 1.5" tri-clamp connection. Wort in/out tubing is 0.5"OD. Heating element sold separately. See link below.
  • This braided hose is great. Non-toxic, thick, resists kinks. Suggested only for temperatures between 25° and 175° F. Sold in lengths of 10 feet. For example, ordering quantity of 2 will give you 20 feet of hose.
  • Food-grade 3/8" ID tubing designed for beverage use

    Very easy to clean. Not approved for boiling temperatures. Tubing is sold in lengths of 10 ft. Example: to buy 20 feet, order a quantity of 2. Great for use as a blowoff tube on your fermenter.
  • PubJug beer and beverage serving kegs

    Say goodbye to Corneys! PubJugs are kegs with a North American Sankey valve and spear installed in a 4" tri-clamp cap. This makes them the perfect keg for serving many beverages. Dispense beer, cold brew coffee, cocktails, margaritas, wine, kombucha and more. Now available in two sizes! 1/2 bbl (about 15.5 gallon) and 1/6 bbl (about 5.75 gallon). Finally... A serving keg that's economical, easy to clean and compatible with North American Sankey equipment. Homebrewers can easily clean these kegs without sacrificing sanitary fittings. Slightly more expensive than Corney kegs but with lots of features:
    • 1/2 bbl (15.5 gal) stainless steel keg sizes available
    • 4" tri-clamp, sanitary cap with tamper resistant closure for safety
    • Includes drop-in, Sankey D-system valve
    • 60 psi, pull-ring pressure relief valve with sanitary o-ring closure so beer does not touch threads
    • Easy to extract the valve and PRV assembly for cleaning - the entire valve assembly can be taken directly to your sink for cleanup
    • Simple upside down, manual, or automated clean out
    Everyone needs a few PubJugs. They are great for bars and restaurants serving many different beverages:
    • Cold-brew coffee
    • Signature cocktails and margaritas in restaurants and bars
    • Wine
    Please note the Sankey valve is NOT centered in the removable cap. This makes PubJug incompatible with some keg washing equipment.
  • PubJug beer and beverage serving kegs

    Say goodbye to Corneys! PubJugs kegs with a North American Sankey valve and spear installed in a 4" tri-clamp cap. This makes them the perfect keg for serving many beverages. Dispense beer, cold brew coffee, cocktails, margaritas, wine, kombucha and more. Now available in two sizes! 1/2 bbl (about 15.5 gallon) and 1/6 bbl (about 5.75 gallon). Finally... A serving keg that's economical, easy to clean and compatible with North American Sankey equipment. Homebrewers can easily clean these kegs without sacrificing sanitary fittings. Slightly more expensive than Corney kegs but with lots of features:
    • 1/2 bbl (15.5 gal) stainless steel keg sizes available
    • 4" tri-clamp, sanitary cap with tamper resistant closure for safety
    • Includes drop-in, Sankey D-system valve
    • 60 psi, pull-ring pressure relief valve with sanitary o-ring closure so beer does not touch threads
    • Easy to extract the valve and PRV assembly for cleaning - the entire valve assembly can be taken directly to your sink for cleanup
    • Simple upside down, manual, or automated clean out
    Everyone needs a few PubJugs. They are great for bars and restaurants serving many different beverages:
    • Cold-brew coffee
    • Signature cocktails and margaritas in restaurants and bars
    • Wine
    Please note the Sankey valve is NOT centered in the removable cap. This makes PubJug incompatible with some keg washing equipment.
  • Sabco BrewMagic propane to natural gas conversion kit

    This kit will help you convert your low-pressure, CSA-certified BrewMagic V350 system gas type from propane (LP) to natural gas (NG). Kit includes everything shown in the photo. There are several things to consider before ordering:
    • Only purchase this to retrofit BrewMagic V350 systems which are CSA certified and designed for low-pressure, banjo-style burners.
    • This is not for use with BrewMagic 2X, BrewMagic XL, BrewMagic Pilot or BrewMagic Pro.
    • This is not for use with any high-pressure burner systems.
    • Look closely at the photos to determine if you have elbow or straight orifices. Sabco begain using straight orifices in August, 2014.
  • PRV pressure relief valve for modified kegs

    This is the replacement PRV for PubJugs and Sabco Bright Vessels.
    • 60 psi, non-adjustable
    • Made of nickel-plated brass
    • Includes a pull ring for pressure venting
    • 1/4" NPSM thread - straight threads, NOT TAPERED
    • Overall size =   1.5" x 1/2" + plus ring
    • Includes o-ring for sealing
  • Replacement start gasket for PlatePro. These are sold in packages of 2. For example, ordering quantity 1 will give you 2 gaskets.
  • Small-batch wort chiller with removable plates

    This is an extremely efficient, sanitary plate-and-frame heat exchanger with removable plates. PlatePro has a small frame size which is perfect for professional-level, small-scale breweries. Four-pass efficiency in a small package. Specifications:
    • Dimensions: 16" x 14" x 6"
    • Weight: 48 pounds
    • 304 SS tie-bar frame
    • 3/4" tri-clamp connections for wort
    • 304 SS garden hose thread connections for cooling water
    • 41 removable plates made of 316 SS
    • 9.43 square feet surface area (0.23 square feet per plate)
    • EPDM clip flow gaskets
    • Made in the USA
  • Replacement port gasket for PlatePro. These gaskets come in a package of 2 pieces. For example, ordering quantity 1 will give you 2 gaskets.
  • 5-ounce tube of high quality gasket adhesive.
  • Replacement flow gasket for PlatePro. These are sold in packages of 6. For example, ordering quantity 1 will give you 6 gaskets
  • Oxygen Stone Assembly

    $70.00$130.00
    This is a 0.5 micron stone assembly to aerate your wort as it enters the fermenter. The end of the stone is threaded for easy removal and cleaning. Tri-clamp ready for easy removal and sanitary connection. Sabco uses this assembly on its famous ChillWizard system. This assembly is available in two ways:
    • Stone assembly with tri-clamp connection
    • Complete assembly with 1/4" brass barb along with the inline shut-off valve
  • Keg repair parts - o-rings for keg valves

    This is a package of 50 o-rings for keg valves. Color may vary. An essential item for keg maintenance. Use these o-rings along with the correct spiral retaining ring to get out-of-service kegs back to work fast! You should have removal tools and extra valves on hand, as well. Links to these items can be found below. You'll want to make sure you choose the correct o-ring for your keg valve. To do so, first determine if you have drop-in, threaded, or camber valves. We can help:
    • Drop-in valves are installed by dropping the valve into the keyed notches located near the upper edge of the keg neck. Once in place, a stainless, spiral, retaining ring is installed into the upper groove of the keg neck. This holds the valve in position and prevents tampering. Use this o-ring if you have drop-in valves.
    • Camber valves are installed by twisting the valve into the keg neck, then a stainless retaining ring is installed into the upper groove of the keg neck to hold the valve in position. Use this o-ring if you have camber valves.
    • Threaded valves screw into the neck. At the base of the valve is a flat gasket. These valves do not use o-rings. Unfortunately, we no longer carry these flat gaskets. Do NOT order the o-rings on this page.
  • Sabco BrewMagic natural gas to propane conversion kit

    This kit will help you convert your low-pressure, CSA-certified BrewMagic V350 system gas type from natural gas (NG) to propane (LP). Kit includes everything shown in the photo. There are several things to consider before ordering:
    • Only purchase this to retrofit BrewMagic V350 systems which are CSA certified and designed for low-pressure, banjo-style burners.
    • This is not for use with BrewMagic 2X, BrewMagic XL, BrewMagic Pilot or BrewMagic Pro.
    • This is not for use with any high-pressure burner systems.
    • Look closely at the photos to determine if you have elbow or straight orifices. Sabco begain using straight orifices in August, 2014.
  • March 815 High Temperature Home Brewing Pump

    This is the famous March 815 pump with a GFCI plug added. Rated for boiling temperatures. Includes rugged stainless steel pump housing and built-in bracket, 38" cord and GFCI plug. The March 815 has a larger impeller than most wort pumps which makes it easier to prime and avoids cavitation. Specifications:
    • 115 V AC
    • 1/25 Hp
    • Magnetic drive
    • Ryton impeller
    • Encapsulated ceramic magnet
    • Ceramic shaft
    • thrust bearings
    • Viton o-ring gasket
    • 316 SS hardware
    • Open fan cooled
    • Rated for liquid temperatures up to 250° F
  • March 815 High Temperature Home Brewing Pump

    This is the famous March 815 pump with stainless steel housing. The stainless housing is more rugged and rated for 250° F. The larger magnet and impeller design results in higher flow and makes priming easier. Sabco uses this pump on its ChillWizard system. This pump includes a cord but not a plug.
  • Keg maintenance supplies - lock ring removal knife

    These knives help you remove the snap-ring that secures North American keg valves. Ordering quantity of 1 gives you a package of 3 knives. Valve removal tool sold separately. See link below
  • Beer Keg Valve Removal Press Tool

    Very useful tool for removal of North American, D-System Micromatic keg valves. Made of solid stainless steel, this removal tool is not messing around. Other useful keg tools and replacement parts are shown below.
  • Keg Valve Lock Rings for Micromatic Sankey Valves

    These spiral, stainless steel lock rings (also known as snap rings or retaining rings) will secure a Micromatic valve into the D-system, drop-in Sankey neck. Keep these on the shelf to ensure your kegs stay in service. These rings are specifically designed to fit certain valve types. Do not substitute them for other designs! Valves can be pressurized and must be properly secured within the keg neck for safety. Remove and install using a valve removal tool and lock ring knife (sold separately, links below) Sold in packages of 25. For example, ordering a quantity of 2 will give you 50 lock rings.
  • Beer Keg Caps for Sankey Valves

    This is a box of 2,000 keg caps. Choose your color. Made of durable plastic in bright colors. Vented, too. Sabco's keg caps are the very best available and are very popular nationally. Designed for use with standard Sankey valves and keg necks. They keep dirt and debris out of the keg prior to distribution and use.
  • Engraving Shields for Kegs to Hide Brewery Name

    You probably got a great deal on those used kegs but wouldn't you like to get rid of the name engraved in the dome? Use these labels to cover the engraved name. We make the silver crescents labels using the very same heavy-duty, laminated finish and adhesive that is used for permanent federal warning labels. They are also UV resistant and extremely durable. They can endure heat and cold as well as the caustics and other chemicals. Sold in packages of 100. For example, ordering a quantity of 2 will give you 200 keg engraving shields.
  • Stainless steel keg coupler ball valve

    This ball valve has a keg coupler thread and is used to stop beer flow from a standard keg coupler. This thread will not fit a 1/2" outlet.
  • Beer keg coupler and tapper for serving beer

    This keg coupler works with virtually all American keg valves. Commonly known as D-system. Features include:
    • Stainless steel body for durability and resistance to chemicals
    • Stainless steel handle fork for strength
    • Tin/nickel plated probe is resistant to chemicals and won't chip like chrome
    • Short handle is ideal for 1/2 bbl and 1/6 bbl kegs
    • Includes built-in pressure relief valve (55-65 psi)
    • Includes 3/8" barb for gas port (fits 5/16" ID gas hose)
    • Industry standard beer port
     
  • This adapter will help you connect hose to a threaded ball-lock coupler. Better than hose barbs which distort the hose and leave pockets that are very difficult to clean. Use ball-lock couplers, instead. Kit includes the adapter and a stainless steel hose clamp.
  • This coupler will attach to any US Micromatic keg coupler. It will fit either the gas or beer side. Includes the hose barb, coupler nut and gasket Typically, you will want to choose 3/8" for the gas side and 1/2" for the beer side.
  • This is a set of burner orifices for previous versions of BrewMagic with high pressure cast burners as shown in the photo below. This is a set of 3 orifices. These are designed for use with high pressure cast burners only as seen in photo (3/8" Flare x 1/8" MIP elbow). The style of these may vary but the thread sizes do not change. Each orifice is designed specifically for use with propane. High pressure propane sources must be regulated not to exceed 15 psi manifold inlet pressure. High-Pressure-Burner-for-BM If you need orifices for high pressure natural gas, please order this item and submit a note with your order. The note should request Sabco drill out the orifices for natural gas.
  • Federal Warning Labels, Surgeon General Alcohol Warning

    These Federal Warning labels are required by law and have been approved for use on beer kegs nationally. We use an incredibly strong adhesive for stainless application and a thick laminated surface. These stay put even in harsh caustic conditions. 3 3/8" x 1 7/16" with black text on white background. Sold in packages of 50. For example, ordering a quantity of 2 will give you 100 labels.
  • ChillWizard System

    $990.00$1,090.00

    Plate Wort Chiller for Brewers & Beer Brewing

    The ChillWizard system includes everything you need for pumping, chilling and oxygen injection all in one compact, portable unit. High efficiency. Easy cleaning. You'll love it. Features include:
    • Clean in place using the pump
    • Diffusion stone to inject oxygen as wort flows through the chiller
    • Thermometer on the exit side displays wort temperature
    • Adjustable flow rate
    • Pump is capable of sending wort uphill to your fermenter
    • Easily disassembled for periodic deep clean
    • Easily reverse flow through plate chiller for backflushing
    • All built on a compact frame with handle
    • GFCI plug for safety in wet environments
  • Stainless steel carbonation stone for carbonating beer

    This is a replacement carbonation stone for use with the Sabco Carb Wand. Porous metal design  .005  (1/2 micron) 1/8" FIP connection Made of 304 SS
  • Stainless steel beer brewing system brewhouse

    BrewMagic Pilot is a 56-gallon system built on the tried-and-true BrewMagic platform. We have gone all stainless, increased batch capacity, boosted the pump and enlarged the touch-screen.
    The system is ideal for:
    • Startup breweries
    • Brewpubs
    • Pilot brewing and recipe development
    • Nano brewery startups
    • College and university brewing science programs
    Insanely high quality and repeatability have been our claim to fame for almost 30 years. We produced the first commercial-grade RIMS system and have thousands of BrewMagic™ systems in service around the world. BrewMagic® Pro includes the following features:
    • RIMS (recirculating infusion mash system)
    • All-stainless construction
    • 3-vessel design – Hot liquor, mash tun and boil kettle
    • Sanitary, food-grade welding without threaded fittings
    • 80,000 BTU low-pressure jet burners with electronic igniters
    • Tri-clamp fittings, no soft plumbing
    • Precise temperature control without scorching or caramelization
    • Brew 10-50 gallon batch sizes
    • Digital temperature readout on all 3 vessels
    • 7-inch color touch-screen control
    • 2 powerful March TE pumps
    • Sight glass for mash
    • Recipe storage for mash and boil with visual and audible prompts
    • Network and WiFi capable

    Place an order for any BrewMagic system with only 50% down payment. Contact Sabco to start your order.

  • Professional-grade beer brewing system for home brewers

    BrewMagic Presto is a commercial-grade brewing system for home brewers and aspiring professional brewers. This system will level-up your home brewing skills with tri-clamp fittings, sanitary welds, accurate temperature control and a touchscreen with recipe features. Brew on any surface with this electric, 3-vessel brewing system. Sabco has perfected RIMS which leaves you with a true, dedicated hot liquor tank so you are ready to clean or mash in a second batch. No scorching, no temperature stratification. Hit step mash and mash out temperatures with the touch of a button. Program your HLT to maintain a set temperature during the entire brew day so you’re always ready for the next step. The control system is installed with touchscreen, pump and RIMS heater on a stainless steel bracket. No need to figure out how to mount the control box. Just place it on the floor, countertop, workbench, whatever. You’ll be able to easily read the digital temperature readout of all three vessels simultaneously. Brew batch sizes between 5 and 17 gallons at one time. Sabco supplies the power cord with a NEMA 14-50P plug. You supply a 220-240 Volt, 50 Amp circuit. This plug can be replaced with a NEMA L6-30P plug (only needs 30 Amp circuit) if you do not need double-batch capability. HLT and boil heaters include NEMA L6-30 plugs that are attached to the control system. This is much safer and durable than putting plugs directly on the heaters in close proximity to liquids.

    Place an order for any BrewMagic system with only 50% down payment. Contact Sabco to start your order.

  • BrewMagic® Pilot RIMS System

    $7,450.00$9,450.00

    Stainless steel beer brewing system brewhouse

    BrewMagic Pilot is available in electric or gas. Choose your size - 20 gallons or 30 gallons. It's still built on the tried-and-true BrewMagic platform but we have gone all stainless, increased batch capacity, boosted the pump and enlarged the touch-screen. The system is ideal for:
    • Serious home brewers
    • Friends who brew together and each want to keep 10 or 12 gallons
    • Pilot brewing and recipe development
    • Nano brewery startups
    • College and university brewing science programs
    Insanely high quality and repeatability have been our claim to fame for almost 30 years. We produced the first commercial-grade RIMS system and have thousands of BrewMagic™ systems in service around the world. Our reputation precedes us, so you can understand why we were so careful about introducing this new system. Our goal was to increase capacity and add features without sacrificing anything. BrewMagic™ Pilot is the result.
    • RIMS (recirculating infusion mash system)
    • All-stainless construction
    • 3-vessel design – Hot liquor, mash tun and boil kettle
    • Sanitary, food-grade welding without threaded fittings
    • 80,000 BTU low-pressure jet burners with electronic igniters
    • Tri-clamp fittings, no soft plumbing
    • Precise temperature control without scorching or caramelization
    • Brew 10-25 gallon batch sizes
    • Digital temperature readout on all 3 vessels
    • 7-inch color touch-screen control
    • Powerful March TE pump
    • Sight glass for mash
    • Recipe storage for mash and boil with visual and audible prompts
    • Network and WiFi capable
    If you’d prefer a full written quote from one of our brewing experts click here to customize your system or call 419-531-5347 to speak with a brewing system expert today.
       
  • This bleeder valve helps you easily prime your magnetic drive pump. Use the bleeder valve to vent air trapped in the hose on the inlet side of the pump. Sabco includes this valve with each ChillWizard chilling system. We didn't always include it, though, so if you have an older ChillWizard, this is a great upgrade. Made of stainless steel. See link below to order high-temperature silicone tubing to connect boil kettle to pump.
  • Designed for use with household natural gas pressure this cast-iron banjo style burner will produce approx. 30,000 Btu of heating energy. Perfect for your 10-30 gallon mash tun or outdoor cooking. This unit comes with a standard natural gas orifice but can be exchanged for an LP gas orifice. Choose option above. Be advised that when using bottle LP gas that you will need a regulator that will reduce inlet pressure to approx. 11" WC (water column) for best combustion efficiency.
    • 9.2" overall length without orifice
    • 6" burner diameter
    • 4 lbs. cast iron
    • Bracket screw located on the center back side
    • Orifice has 3/8" brass elbow flared connection to fit most gas supply hosing
    • Variable air-mix vent which is used to tune the incoming air and adjust for the most efficient flame
  • This is a set of couplers for ball-lock Corney kegs. Two types are available: threaded and barbed. The barb type will fit any standard 1/4" ID tubing. Simply use a hose clamp. The threaded type, though, is easier to disconnect. Couplers are sold in sets of two as shown in the photo. You’ll get the liquid-out and the gas-in coupling.
  • Tri-Clamp thermometer for brewers

    Get a better view with our adjustable-angle tri-clamp thermometer.  It's adjustable from straight angle all the way to a 60° angle. Features include:
    • Large 3″ dial with bold, bright characters for easy reading
    • Case, bezel and stem in 304 SS
    • Tri-clamp connection in your choice of either 3/4" or 1.5"
    • F° & C° in bold easy-to-read numerals
    • Solid metal construction with stainless probe
    • Hermetically sealed glass lens
    • Easy calibration using screw on back of dial body
    • Accuracy of +/- 1% of full scale
    • Tri-clamp gasket included
  • Adapter - garden hose to sanitary 1/2" or 3/4" tri-clamp

    Use this adapter to connect any 1/2" or 3/4" tri-clamp to the male end of a garden hose. Use your imagination. This could be handy for connecting a garden hose to just about every Sabco vessel and fitting.
  • These adapters are perfect for making any 3/4" to  1=1/2" TC connection
  • Stainless steel adapter - keg coupler to 1/2" tri-clamp

    Use this adapter to modify a keg coupler to accept your 1/2" tri-clamp hoses. Includes tailpiece and black buna gasket. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
  • Stainless steel adapter - Coupler thread to 1/2" tri-clamp

    Use this adapter to modify the female end of a Micro Matic shut-off valve to accept your 1/2" tri-clamp hoses. It is also perfect for adding a shut-off valve between two tri-clamp hoses. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
  • Stainless steel adapter - 1/2" female NPT to 1/2" sanitary tri-clamp

    This adapter will fit a 1/2" female NPT connection and convert it to tri-clamp. Easily connect and disconnect hoses once you convert. Adapters are sold individually.
  • Stainless steel adapter - 1/2" NPT to 1/2" sanitary tri-clamp

    This adapter will help you convert the threaded fittings on your pump to sanitary tri-clamp. Once you have converted your pump to tri-clamp fittings you'll be able to easily connect and disconnect your hoses. Package of 1 adapter. We know the picture shows 2 but they are sold individually.
  • Stainless steel adapter - 1/2" hose to 1/2" female NPT

    This is an adapter to connect a 1/2" hose to any 1/2" female pipe thread (NPT). Kit contains one adapter and one hose clamp.
  • Adapter - 1/2" hose to 1/2" male NPT for home brewing pump

    This is a swivel adapter to connect a 1/2" hose to any 1/2" male pipe thread (NPT). Use it to connect a hose to the inlet or outlet of a pump with 1/2" MIP inlet or outlet threads. The large grip-style nut makes it easy to snug up the adapter by hand without tools. This eliminates the possibility of damaging the o-ring by over-tightening with a wrench. This also allows an easy disconnect for cleaning. Kit contains one adapter (grip & tailpiece), o-ring, and hose clamp.
  • Stainless steel 8" Tri-Clamp Compatible Long Ferrule

    We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • Stainless steel 8" tri-clamp for sanitary fittings in a brewery

    8" Tri-Clamp. All stainless. We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order for clearance items.
  • Stainless Steel 8" Tri-Clamp cap

    8" Tri-Clamp compatible cap. All stainless. We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • 8" Tri-Clamp Buna Gasket

    We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packs of 6. For example, ordering quantity 1 will give you 6 plates.
  • 4 Inch Stainless Steel Tri-Clamp Kit with Clamp & Gasket

    This kit includes a 4" tri-clamp and a buna gasket. Clamp is solid 304 SS with a heavy-turn bolt.
  • 4" tri-clamp Buna gaskets for brewing and other sanitary applications

    This is a package of 3 buna gaskets for 4" tri-clamps. These are the gaskets Sabco uses on products such as PubJug, Sabco Fermenters and Sabco Bright Vessels Sold in packages of 3. For example, ordering quantity of 2 will give you 6 gaskets.