[wcas-search-form]

  • Say goodbye to Corneys! Now available in two sizes! 1/2 bbl (about 15.5 gallon) Finally... A serving keg that's economical, easy to clean and compatible with North American Sankey equipment. These are 1/2 barrel kegs with a North American Sankey valve and spear installed in a 4" tri-clamp cap. Please note the Sankey valve is NOT centered in the removable cap. This makes PubJug incompatible with some keg washing equipment. Homebrewers can easily clean these kegs without sacrificing sanitary fittings. Slightly more expensive than Corney kegs but with lots of features:
    • 1/2 bbl (15.5 gal) stainless steel keg sizes available
    • 4" tri-clamp, sanitary cap with tamper resistant closure for safety
    • Includes drop-in, Sankey D-system valve
    • 60 psi, pull-ring pressure relief valve with sanitary o-ring closure so beer does not touch threads
    • Easy to extract the valve and PRV assembly for cleaning - the entire valve assembly can be taken directly to your sink for cleanup
    • Simple upside down, manual, or automated clean out
    Everyone needs a few PubJugs. They are great for bars and restaurants serving many different beverages:
    • Cold-brew coffee
    • Signature cocktails and margaritas in restaurants and bars
    • Wine
  • Sight Glass

    $80.00$140.00
    Built to Sabco specifications, this sight glass is durable and sanitary. Notice the thickness of top and bottom plates. Easy to take apart for cleaning. Available as either sight glass only or as a kit designed to retrofit older BrewMagic V350 models that used a plastic tube as sight glass on mash inlet. Use with any 1/2" or 3/4" tri-clamp connection. Specifications:
    • Made of 304 SS
    • Overall length = 4.5"
    • Diameter = 2.25"
    • Tube diameter = 3/4"
    The retrofit kit option includes:
    • Sabco sight glass
    • Tri-clamp elbow
    • 2 TC clamps with gaskets
    • 1/2"OD compression union
  • Say goodbye to Corneys!

    Now available in two sizes! 1/6 bbl (about 5 gallon) Finally... A serving keg that's economical, easy to clean and compatible with North American Sankey equipment. 1/6 barrel keg with a North American Sankey valve and spear installed in a 4" tri-clamp cap. Please note the Sankey valve is NOT centered in the removable cap. This makes PubJug incompatible with some keg washing equipment. Homebrewers can easily clean these kegs without sacrificing sanitary fittings. Slightly more expensive than Corney kegs but with lots of features:
    • 1/6 bbl (5.16 gal)
    • 4" tri-clamp, sanitary cap with tamper resistant closure for safety
    • Includes drop-in, Sankey D-system valve
    • 60 psi, pull-ring pressure relief valve with sanitary o-ring closure so beer does not touch threads
    • Easy to extract the valve and PRV assembly for cleaning - the entire valve assembly can be taken directly to your sink for cleanup
    • Simple upside down, manual or automated clean out
    Everyone needs a few PubJugs. They are great for bars and restaurants serving many different beverages:
    • Cold-brew coffee
    • Signature cocktails and margaritas in restaurants and bars
    • Wine
  • 8" Tri-Clamp Compatible Long Ferrule. All stainless. We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • 8" Tri-Clamp Buna Gasket. We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • 8" Tri-Clamp compatible cap. All stainless. We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order of this item.
  • 8" Tri-Clamp. All stainless. We have surplus inventory of this item so it's marked way down. Price does not include freight. Call or email for a discounted freight quote based upon your total order for clearance items.
  • Replacement start gasket for PlatePro. These are sold in packages of 2. For example, ordering quantity 1 will give you 2 gaskets.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packages of 2. For example, ordering quantity 1 will give you 2 plates.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packs of 2. For example, ordering quantity 1 will give you 2 plates.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packs of 6. For example, ordering quantity 1 will give you 6 plates.
  • Replacement port gasket for PlatePro. These gaskets come in a package of 2 pieces. For example, ordering quantity 1 will give you 2 gaskets.
  • Replacement flow gasket for PlatePro. These are sold in packages of 6. For example, ordering quantity 1 will give you 6 gaskets
  • Designed for use with household natural gas pressure this cast-iron banjo style burner will produce approx. 30,000 Btu of heating energy. Perfect for your 10-30 gallon mash tun or outdoor cooking. This unit comes with a standard natural gas orifice but can be exchanged for an LP gas orifice. Choose option above. Be advised that when using bottle LP gas that you will need a regulator that will reduce inlet pressure to approx. 11" WC (water column) for best combustion efficiency.
    • 9.2" overall length without orifice
    • 6" burner diameter
    • 4 lbs. cast iron
    • Bracket screw located on the center back side
    • Orifice has 3/8" brass elbow flared connection to fit most gas supply hosing
    • Variable air-mix vent which is used to tune the incoming air and adjust for the most efficient flame
  • BrewMagic® Pilot RIMS System

    $7,450.00$9,450.00
    Have questions or need info on any of our great BrewMagic brewing systems?   Contact Matt directly at (419) 345-8290, via call or text, and he can assist with anything you may need to get started. BrewMagic Pilot is available in electric or gas. Choose your size - 20 gallons or 30 gallons. It's still built on the tried-and-true BrewMagic platform but we have gone all stainless, increased batch capacity, boosted the pump and enlarged the touch-screen. The system is ideal for:
    • Serious home brewers
    • Friends who brew together and each want to keep 10 or 12 gallons
    • Pilot brewing and recipe development
    • Nano brewery startups
    • College and university brewing science programs
    Insanely high quality and repeatability have been our claim to fame for almost 30 years. We produced the first commercial-grade RIMS system and have thousands of BrewMagic™ systems in service around the world. Our reputation precedes us, so you can understand why we were so careful about introducing this new system. Our goal was to increase capacity and add features without sacrificing anything. BrewMagic™ Pilot is the result.
    • RIMS (recirculating infusion mash system)
    • All-stainless construction
    • 3-vessel design – Hot liquor, mash tun and boil kettle
    • Sanitary, food-grade welding without threaded fittings
    • 80,000 BTU low-pressure jet burners with electronic igniters
    • Tri-clamp fittings, no soft plumbing
    • Precise temperature control without scorching or caramelization
    • Brew 10-25 gallon batch sizes
    • Digital temperature readout on all 3 vessels
    • 7-inch color touch-screen control
    • Powerful March TE pump
    • Sight glass for mash
    • Recipe storage for mash and boil with visual and audible prompts
    • Network and WiFi capable
    If you’d prefer a full written quote from one of our brewing experts click here to customize your system or call 419-531-5347 to speak with a brewing system expert today.
       
  • This LP hose will connect your propane bottle to your BreMagic system. It includes a 1/4" NPT male thread for connecting to the regulator on your BrewMagic V350 system. The other end connects to 20-pound North American LP bottles. Please note this hose will not work with most LP bottles outside North America.
  • Use this adapter to modify the female end of a Micromatic shut-off valve to accept your 1/2" tri-clamp hoses. It is also perfect for adding a shut-off valve between two tri-clamp hoses. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
  • Unitanks from Sabco are affordable and rich in features.
    • Fully jacketed for cooling
    • Insulated
    • Clean-in-place ready
    • Top manway
    • Thermowell
    • Bottom outlet with butterfly valve for yeast cropping
    • Adjustable rotating arm with butterfly valve for racking
    • Sight tube
    • Includes adjustable pressure relief valve and vacuum breaker
    • CIP spray ball
    • Carbonation port with removable stainless steel stone
  • Use this adapter to connect any 1/2" or 3/4" tri-clamp to the male end of a garden hose. Use your imagination. This could be handy for connecting a garden hose to just about every Sabco vessel and fitting.
  • Food-grade 3/8" ID tubing designed for beverage use. Very easy to clean. Not approved for boiling temperatures. Tubing is sold in lengths of 10 ft. Example: to buy 20 feet, order a quantity of 2. Great for use as a blowoff tube on your fermenter.
  • This is a complete Tri-Clamp assembly for performing your own installation of a 4" sanitary port on any vessel. Includes:
    • 4" tri-clamp long ferrule, 304 SS
    • 4" tri-clamp with heavy turn bolt, 304 SS
    • 4" tri-clamp cap, 304 SS
    • 4" buna tri-clamp gasket
  • This kit includes a 4" tri-clamp and a buna gasket. Clamp is solid 304 SS with a heavy-turn bolt.
  • Get a better view with out adjustable-angle tri-clamp thermometer.  It's adjustable from straight angle all the way to a 60° angle. Features include:
    • Large 3″ dial with bold, bright characters for easy reading
    • Case, bezel and stem in 304 SS
    • Tri-clamp connection in your choice of either 3/4" or 1.5"
    • F° & C° in bold easy-to-read numerals
    • Solid metal construction with stainless probe
    • Hermetically sealed glass lens
    • Easy calibration using screw on back of dial body
    • Accuracy of +/- 1% of full scale
    • Tri-clamp gasket included
  • Call or text Matt directly at 419-345-8290 with questions.
    BrewMagic Pilot is a 56-gallon system built on the tried-and-true BrewMagic platform. We have gone all stainless, increased batch capacity, boosted the pump and enlarged the touch-screen. The system is ideal for:
    • Startup breweries
    • Brewpubs
    • Pilot brewing and recipe development
    • Nano brewery startups
    • College and university brewing science programs
    Insanely high quality and repeatability have been our claim to fame for almost 30 years. We produced the first commercial-grade RIMS system and have thousands of BrewMagic™ systems in service around the world. BrewMagic® Pro includes the following features:
    • RIMS (recirculating infusion mash system)
    • All-stainless construction
    • 3-vessel design – Hot liquor, mash tun and boil kettle
    • Sanitary, food-grade welding without threaded fittings
    • 80,000 BTU low-pressure jet burners with electronic igniters
    • Tri-clamp fittings, no soft plumbing
    • Precise temperature control without scorching or caramelization
    • Brew 10-50 gallon batch sizes
    • Digital temperature readout on all 3 vessels
    • 7-inch color touch-screen control
    • 2 powerful March TE pumps
    • Sight glass for mash
    • Recipe storage for mash and boil with visual and audible prompts
    • Network and WiFi capable
     
  • Sabco jet burners are not messing around. This burner is rated at 120,000 BTU. It measures 8" in diameter, weighs 4.6 pounds and has 2 types of built-in brackets for adapting igniters. Gas pipe connection is 1/2" NPT. Designed for low pressure. Natural gas supplies are typically already low pressure but bottled propane will need to be regulated below 11" water column for these burners.
  • Sabco jet burners are not messing around. This burner is rated at 60,000 BTU. It measures 5 5/8" in diameter, weighs 2.6 pounds and has a built-in bracket for adapting igniters. Gas pipe connection is 3/8" NPT. Designed for low pressure. Natural gas supplies are typically already low pressure but bottled propane will need to be regulated below 11" water column for these burners.  
  • Stainless steel chamber for low-density heating element. No threads. All sanitary welding by the best welders around. Constructed of 304 SS, 15.13"L, 1.38"ID, 1.5" tri-clamp connection. Wort in/out tubing is 0.5"OD. Heating element sold separately. See link below.
  • Do you have a false bottom in your BrewMagic V350 kettle? Consider converting to a whirlpool siphon. It's easy to manually create a whirlpool in the small kettle on a BrewMagic V350 system if you have this tri-clamp siphon. After knockout, rotate your spoon around the perimeter of the kettle to turn the wort and create a cone of trub. You'll leave that stuff behind instead of clogging up your ChillWizard or transferring it to your fermenter. Made of 304 SS and sanitary welded with a tri-clamp connection.
  • These adapters are perfect for making any 3/4" to  1=1/2" TC connection
  • 5-ounce tube of high quality gasket adhesive.
  • Use this to connect any 1/2" threaded male outlet to your 1/2" ID hose. Perfect for connecting most pump motors. Made of 304 SS. Includes adapter and SS hose clamp.
  • Close any 1.5" tri-clamp ferrule with this clamp. Made of 304 SS. Kit contains:
    • Two 1.5" tri-clamp caps
    • Two 1.5" buna gaskets
  • Close any 1/2" or 3/4" tri-clamp ferrule with this cap. Made of 304 SS. Kit contains:
    • 2 tri-clamp caps
    • 2 buna gaskets
  • This is a replacement carbonation stone for use with the Sabco Carb Wand. Porous metal design  .005  (1/2 micron) 1/8" FIP connection Made of 304 SS
  • This is the replacement PRV for a Sabco Bright Vessel.
    • 60 psi, non-adjustable
    • Made of nickel-plated brass
    • Includes a pull ring for pressure venting
    • 60 PSI,  Non-Adjustable
    • 1/4" MIP thread
    • Overall size =   1.5" x 1/2" + plus ring
  • 4″ Sankey Tri-Clamp Cap

    $110.00$135.00
    Easily convert your 4" tri-clamp storage vessels to a standard D-system Sankey for simply cleaning or dispensing. This specially designed cap allows inspection of the interior with the simple removal of the tri-clamp. Take advantage of the convenient Sankey valve and then quickly extract the entire valve assembly to easily clean the inside. Important Note: A PRV (pressure relief valve) is needed for your coupler or tank. Serious personal injury may result if your pressure vessel does not include this.
  • This kit includes 2 heavy-duty 1.5" tri-clamps along with 2 FDA approved buna gaskets. This size fits 1.5" tri-clamp ferrules with 2" outside diameter.
  • Use this barb when you need to connect 3/8" ID hose or tubing to a 1/2" or 3/4" tri-clamp. We use this on our dual regulator to push COinto a fermenter or bright tank.
  • You broke your BrewMagic V350 touch-screen?!?! Fear not... Smashing or cracking your touch-screen is not covered by warranty but we offer a service to replace the screen so you don't need to purchase a brand new controller. Simply purchase the repair service from this page and send us your V350 controller. We'll replace the screen and send it back to you within a few days.
  • Oxygen Stone Assembly

    $70.00$130.00
    This is a 0.5 micron stone assembly to aerate your wort as it enters the fermenter. The end of the stone is threaded for easy removal and cleaning. Tri-clamp ready for easy removal and sanitary connection. Sabco uses this assembly on its famous ChillWizard system. This assembly is available in two ways:
    • Stone assembly with tri-clamp connection
    • Complete assembly with 1/4" brass barb along with the inline shut-off valve
  • This 4" tri-clamp cap can be used to upgrade an older Sabco Fermenter to the current design. Two sanitary ports in the cap give you lots of options. On our Sabco Fermenter we use one for blow-off. The other port can be used to inject oxygen or COwith our Carb Wand. This lets you use your fermenter as a bright tank. Pro tip: Get this cap along with the Carb Wand and Dirty Gauge (links below) to carbonate very quickly right inside your fermenter or bright tank. This cap also includes 2 tri-clamps, 2 caps and 2 gaskets.
  • Sabco Carb Wand

    $95.00$130.00
    This is the best way to carbonate using your Sabco Bright vessels. You can also turn your Sabco Fermenter into a Bright tank. The Carb Wand can be inserted into your Sabco Fermenter or Bright using the 3/4" tri-clamp port in the top. Then, connect a bottle of COfor carbonating or oxygen for aerating. The 0.5 micron stone on the Carb Wand will get the job done quickly. For older Sabco Fermenters without the tri-clamp ports in the cap, purchase this Carb Wand along with the new Fermenter cap (see link below). Made of 304 SS. Includes shut-off valve and brass 5/16" barb.
  • Silicone Tubing

    $75.00$80.00
    Silicone tubing is ideal for high temperatures. This tubing is rated for -100°F to 500°F. Perfect for moving wort out of your boil kettle. Meets FDA standards and is tasteless and odorless. Available in 1/2" and  3/4" ID. Tubing is sold in lengths of 10 feet. For example, ordering a quantity of 2 will give you 20 feet. Other specifications:
    • Working pressure up to 10 psi
    • Odorless, tasteless and inert
    • Good insulating properties
    • Resists deterioration from ultraviolet light
    • NSF 51 listed
  • These are band new, drop-in, D-system, twin-lug American Sankey beer keg valves. They come equipped with o-ring. Keep a few of these backup valves on hand to minimize out-of-service kegs.
    These are 1/2 barrel (15.5 gal) standard keg length (21.75") but can be cut down to fit smaller capacity kegs.
    Sold in packages of 10 valves. For example, ordering a quantity of 2 will give you 20 valves.
  • These Federal Warning labels are required by law and have been approved for use on beer kegs nationally. We use an incredibly strong adhesive for stainless application and a thick laminated surface. These stay put even in harsh caustic conditions. 3 3/8" x 1 7/16" with black text on white background. Sold in packages of 50. For example, ordering a quantity of 2 will give you 100 labels.
  • You probably got a great deal on those used kegs but wouldn't you like to get rid of the name engraved in the dome? Use these labels to cover the engraved name. We make the silver crescents labels using the very same heavy-duty, laminated finish and adhesive that is used for permanent federal warning labels. They are also UV resistant and extremely durable. They can endure heat and cold as well as the caustics and other chemicals. Sold in packages of 100. For example, ordering a quantity of 2 will give you 200 keg engraving shields.
  • These spiral, stainless steel lock rings (also known as snap rings or retaining rings) will secure a Micromatic valve into the D-system, drop-in Sankey neck. Keep these on the shelf to ensure your kegs stay in service. These rings are specifically designed to fit certain valve types. Do not substitute them for other designs! Valves can be pressurized and must be properly secured within the keg neck for safety. Remove and install using a valve removal tool and lock ring knife (sold separately, links below) Sold in packages of 25. For example, ordering a quantity of 2 will give you 50 lock rings.
  • This is a package of 50 o-rings for keg valves. Color may vary. An essential item for keg maintenance. Use these o-rings along with the correct spiral retaining ring to get out-of-service kegs back to work fast! You should have removal tools and extra valves on hand, as well. Links to these items can be found below. You'll want to make sure you choose the correct o-ring for your keg valve. To do so, first determine if you have drop-in, threaded, or camber valves. We can help:
    • Drop-in valves are installed by dropping the valve into the keyed notches located near the upper edge of the keg neck. Once in place, a stainless, spiral, retaining ring is installed into the upper groove of the keg neck. This holds the valve in position and prevents tampering. Use this o-ring if you have drop-in valves.
    • Camber valves are installed by twisting the valve into the keg neck, then a stainless retaining ring is installed into the upper groove of the keg neck to hold the valve in position. Use this o-ring if you have camber valves.
    • Threaded valves screw into the neck. At the base of the valve is a flat gasket. These valves do not use o-rings. Unfortunately, we no longer carry these flat gaskets. Do NOT order the o-rings on this page.