- Working pressure up to 10 psi
- Odorless, tasteless and inert
- Good insulating properties
- Resists deterioration from ultraviolet light
- NSF 51 listed
- Silicone tubing is ideal for high temperatures. This tubing is rated for -100°F to 500°F. Perfect for moving wort out of your boil kettle. Meets FDA standards and is tasteless and odorless. Available in 1/2" and 3/4" ID. Tubing is sold in lengths of 10 feet. For example, ordering a quantity of 2 will give you 20 feet. Other specifications:
- This is the famous March 815 pump with stainless steel housing. The stainless housing is more rugged and rated for 250° F. The larger magnet and impeller design results in higher flow and makes priming easier. Sabco uses this pump on its ChillWizard system. This pump includes a cord but not a plug.
- This adapter will help you connect hose to a threaded ball-lock coupler. Better than hose barbs which distort the hose and leave pockets that are very difficult to clean. Use ball-lock couplers, instead. Kit includes the adapter and a stainless steel hose clamp.
- This bleeder valve helps you easily prime your magnetic drive pump. Use the bleeder valve to vent air trapped in the hose on the inlet side of the pump. Sabco includes this valve with each ChillWizard chilling system. We didn't always include it, though, so if you have an older ChillWizard, this is a great upgrade. Made of stainless steel. See link below to order high-temperature silicone tubing to connect boil kettle to pump.
- This coupler will attach to any US Micromatic keg coupler. It will fit either the gas or beer side. Includes the hose barb, coupler nut and gasket Typically, you will want to choose 3/8" for the gas side and 1/2" for the beer side.
- This braided hose is great. Non-toxic, thick, resists kinks. Suggested only for temperatures between 25° and 175° F. Sold in lengths of 10 feet. For example, ordering quantity of 2 will give you 20 feet of hose.
- This little 90° elbow is versatile and you will think of many ways to use it. Specifications:
- Short radius, approximately 2.75" x 3.5"
- Includes 1/2" tri-clamp ferrule
- Will easily connect to any tri-clamp hose
- Sanitary welded
- Durable and heavy-duty
- This tri-clamp, sanitary thermowell can be used in place of the standard dial thermometer on your Sabco fermenter. Insert a temperature probe into the thermowell and connect it to a temperature controller. The thermowell connects easily to our Sabco fermenter. Just remove the tri-clamp thermometer and attach this. Specifications:
- Connects via 1.5" tri-clamp
- Will accept any type of probe with maximum OD of 1/4"
- Made of 304 SS
- Tube length is 9.25"
- This is a swivel adapter to connect a 1/2" hose to any 1/2" male pipe thread (NPT). Use it to connect a hose to the inlet or outlet of a pump with 1/2" MIP inlet or outlet threads. The large grip-style nut makes it easy to snug up the adapter by hand without tools. This eliminates the possibility of damaging the o-ring by over-tightening with a wrench. This also allows an easy disconnect for cleaning. Kit contains one adapter (grip & tailpiece), o-ring, and hose clamp.
- This is an adapter to connect a 1/2" hose to any 1/2" female pipe thread (NPT). Kit contains one adapter and one hose clamp.
- This is a tri-clamp kit, including 2 clamps and 2 gaskets. Out tri-clamps are heavy-duty and higher quality than a lot of what you'll find out there. Other sizes are available, as well. Look for links below.
- Use this adapter to modify a keg coupler to accept your 1/2" tri-clamp hoses. Includes tailpiece and black buna gasket. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
- This adapter will help you convert the threaded fittings on your pump to sanitary tri-clamp. Once you have converted your pump to tri-clamp fittings you'll be able to easily connect and disconnect your hoses. Package of 1 adapter. We know the picture shows 2 but they are sold individually.
- This adapter will fit a 1/2" female NPT connection and convert it to tri-clamp. Easily connect and disconnect hoses once you convert. Adapters are sold individually.
- This is a tri-clamp 90° elbow. The tri-clamp ferrules are 1/2". We use the small version on the top of our Sabco Fermenters to provide a stable mount for valves. We're sure you'll have other interesting ideas for them, too. We make these in two different sizes. The small elbow has a radius of 2 3/16". The large elbow has two different extension lengths. One is 3 3/8" and the other is 4".
- This kit gives you everything you need to turn a regular hose into a sanitary, tri-clamp hose. You'll receive 2 stainless tri-clamp ferrules and two stainless hose clamps.
- This is a very high quality thermometer with tri-clamp connection. Features include:
- Large 3" dial with bold, bright characters for easy reading
- Case, bezel and stem in 304 SS
- Tri-clamp connection in your choice of either 3/4" or 1.5"
- F° & C° in bold easy-to-read numerals
- Solid metal construction with stainless probe
- Hermetically sealed glass lens
- Easy calibration using screw on back of dial body
- Accuracy of +/-1% of full scale
- Tri-clamp gasket included
- Stem length on 1.5" TC version is 1-13/16"
- Stem length on the 3/4" TC version is 1-5/16"
- The Dirty Gauge was invented by Steve Acord at Dirty Bucket Brewing Company in Woodinville, WA. This brilliant product accurately reads pressure during the carbonation process. You can attach the Dirty Gauge directly to the top of your Sabco Fermenter. Use this in conjunction with our carbonation stone and speed up the process considerably. Two options are available. The coupler thread option includes the gasket for the threaded nut. The tri-clamp option does not include a 1/2" tri-clamp gasket or clamp.
- Brewer hose with tri-clamp fittings included. Don't purchase them all separately like some sort of fool. This hose is 5 feet long and allows you to make a quick, sanitary connection between tri-clamp components. We pre-assemble everything for you with brewer hose, tri-clamp ferrules, stainless steel hose clamps, tri-clamps and gaskets. You'll save money by buying these components as a kit.
