• The multi-use brewer pump with added safety features and rugged stainless housing. This is the March 815 High Temp model and comes with built in bracket, 38" cord, and a Ground Fault Circuit Interrupter for your safety.  It has a slightly larger impeller and magnet than the standard wort pump so it tends to prime easier and avoid cavitation.  Rugged and safe!
    Add to cart Details
  • Original Brew-Magic Pump

    $195.00$240.00
    Find this efficient pump in earlier model Brew-Magic Systems.  Choose from two available voltages below.   The inlet and outlet on this pump are positioned specifically to match the original Brew-Magic System plumbing.  Current model pumps have a different pump housing and may not work with your system.  Compare this with the High Temperature pump also found in the SABCO store.  See link below.  Contact SABCO with questions.    
    Select options Details
  • SABCO's Brew-Magic System now utilizes the March 815 SS. This incorporates a solid stainless housing and eliminates past issues with more delicate plastic housings which are less rugged.  Rated at 250F. Extensively tested for its' non-damaging, wort moving characteristics. Larger magnet and impeller design makes priming easier with improved flow-rate. Other pump designs can damage or whip air into brewer's wort.  Choose the correct voltage configuration to match your specific needs or device model.
    Select options Details
  • Coordinate your RIMS (recirculating) wort flow with the Mash Outlet Assembly by SABCO.  Choose below from three different connection designs to match the existing outlet of your Mash Kettle.  (1/2 or 3/4" Tri-Clamp, Compression, or 1/2" Threaded).  You'll find this amazing Mash Outlet on several of SABCO's famous RIMS systems.
    Select options Details
  • Many home brewers "re-invent" the RIMS heat chamber every year. On the other hand, SABCO has developed and perfected it ever since we introduced the very first RIMS system "Brew-Magic" way back in 1990. Take a look at the Brew-Magic design and the reasons why it won't pay to "re-invent" perfection.  
    Add to cart Details
  • Sabco's Universal Siphon is clearly the best available. Totally sanitary and can be attached to a 1/2" flush mounted coupling.  Designed for use with our Universal Kettle, and false bottom.  No welding needed.
    Add to cart Details
  • This kit will allow a completely closed-system transfer of clear beer from a source vessel,  such as the TC outlet of SABCO’s fermenter.   Beer will flow into your Corney and fill from the bottom-up through the dip-tube.
    Add to cart Details
  • Tri-Clamp Connector Hose – 5 ft.

    Rated 2.00 out of 5
    $70.00$76.00
    Here's the quick and easy way to assemble a brewer hose! Let SABCO do it for you!
    Select options Details
  • Select options Details
  • The Brew-Magic retrofit sight-glass kit is now available.  This kit will enable you to connect this beautiful site glass to the Mash inlet of the Brew-Magic System and thereby eliminate the previous hose connector.  
    Select options Details
  • Tygon's smooth, non-porous bore ensures sanitary fluid path by minimizing potential for bacterial growth. It boasts outstanding resistance to harsh alkaline cleaners and is unaffected by commonly used sanitizers. Suggested service temperatures to 175 F.  Not suggested for boiling temperature transfers. This is a superb FDA, hospital grade tubing designed for cleanability and beverage transfer.
    Add to cart Details
  • This RTD (resistance temperature detector) provides accurate and stable information to your V350 Brew-Magic controller.  This will replace the existing one in your Brew-Magic System
    Add to cart Details
  • This kit includes two (2) all stainless hose connector ferrules to convert any hose to sanitary tri-clamp type.  ( Your choice of either 3/4" or 1/2"OD ) as well as two (2) all stainless hose clamps. Just what you need to complete both ends of one hose.
    Select options Details
  • These adapters are perfect for making any 3/4" to  1=1/2" TC connection
    Select options Details
  • Use this Tri-Clamp siphon kit to replace the siphon on SABCO kettles that have an internal outlet, with 1/2" Tri-clamp ferrule.  This includes kettles found on many models of the Brew-Magic System.
    Add to cart Details
  • When it’s time to drain or siphon heated liquid into another container, it’s essential that you eliminate splashing. The ability to direct flow smoothly and accurately can only be assured with a directional spout. SABCO’s stainless drain-tube spout is a perfect match-up for our stainless ball-valve. Drain your kettle into another vessel without spilling a drop! Included is a smooth 90 degree turn-down, 1/2" stainless-steel tube along with a 1/2" stainless compression adapter.
    Add to cart Details
  •   1/2" Tri-Clamp X Male Coupler Thread (Micromatic). Perfect to add a shut-off valve between two Tri-clamp hoses.
    Add to cart Details
  • This solid stainless bleeder valve does a fantastic job of priming the most stubborn magnetic drive, centrifugal pump.  Choose from two versions: tri-clamp or straight tube connection.  
    Select options Details
  •   1/2" Tri-Clamp X Coupler Thread (Micromatic).  
    Add to cart Details
  • Choose from two different size options below. The smaller sanitary 90 degree elbow is the one used on the top of the SABCO fermenter.  All stainless with 1/2" Tri-Clamp ferrules at each end.  This elbow has a tight radius extention of   2-3/16". (face to tube center) The larger elbow is likewise 90 degrees with 1/2" TC ferrules, but has two extension lengths: 3-3/8" and also 4" depending on your preferred connection end.  Use this to more easily orient a connected sanitary ball-valve and hosing in a downward direction for flow to or from your pump. This will place the ball-valve in a more convenient and space saving position.  
    Select options Details
  • Pure silicone is ideal in all brewer temperature ranges.  FDA standards.  Tasteless and odorless. Perfect for moving boiling wort to and from your chiller!    1/2" ID  or 3/4" ID  x 10ft. length  
    Select options Details
  • This small 90 degree tri-clamp elbow can serve you in more ways than one.
    Add to cart Details
  •     All 304 Stainless. Use this to connect any 1/2" threaded male outlet to your 1/2" ID hose. Perfect to connect most brewer pump motors. Includes both adapter and SS hose clamp.
    Add to cart Details
  •     Use this stainless adapter to connect a 1/2" ID hose to any female 1/2" pipe thread. Kit contains one adapter and hose clamp.
    Add to cart Details