• This ball valve has a keg coupler thread and is used to stop beer flow from a standard keg coupler. This thread will not fit a 1/2" outlet.
  • This little 90° elbow is versatile and you will think of many ways to use it. Specifications:
    • Short radius, approximately 2.75" x 3.5"
    • Includes 1/2" tri-clamp ferrule
    • Will easily connect to any tri-clamp hose
    • Sanitary welded
    • Durable and heavy-duty
  • This tri-clamp, sanitary thermowell can be used in place of the standard dial thermometer on your Sabco fermenter. Insert a temperature probe into the thermowell and connect it to a temperature controller. The thermowell connects easily to our Sabco fermenter. Just remove the tri-clamp thermometer and attach this. Specifications:
    • Connects via 1.5" tri-clamp
    • Will accept any type of probe with maximum OD of 1/4"
    • Made of 304 SS
    • Tube length is 9.25"
  • This is a swivel adapter to connect a 1/2" hose to any 1/2" male pipe thread (NPT). Use it to connect a hose to the inlet or outlet of a pump with 1/2" MIP inlet or outlet threads. The large grip-style nut makes it easy to snug up the adapter by hand without tools. This eliminates the possibility of damaging the o-ring by over-tightening with a wrench. This also allows an easy disconnect for cleaning. Kit contains one adapter (grip & tailpiece), o-ring, and hose clamp.
  • This is an adapter to connect a 1/2" hose to any 1/2" female pipe thread (NPT). Kit contains one adapter and one hose clamp.
  • These are replacement sight glass tubes for the BrewMagic V350 system. These sight glass tubes fit the boil kettle and the HLT. Sold in packages of 2.
  • This is a set of couplers for ball-lock Corney kegs. Two types are available: threaded and barbed. The barb type will fit any standard 1/4" ID tubing. Simply use a hose clamp. The threaded type, though, is easier to disconnect. Couplers are sold in sets of two as shown in the photo. You’ll get the liquid-out and the gas-in coupling.
  • This stainless steel lid can be used as a replacement for any BrewMagic V350 system vessel. In fact, it will fit any 12" diameter opening.
  • This kit will help you convert your low-pressure, CSA-certified BrewMagic V350 system gas type from propane (LP) to natural gas (NG). Kit includes everything shown in the photo. There are several things to consider before ordering:
    • Only purchase this to retrofit BrewMagic V350 systems which are CSA certified and designed for low-pressure, banjo-style burners.
    • This is not for use with BrewMagic 2X, BrewMagic XL, BrewMagic Pilot or BrewMagic Pro.
    • This is not for use with any high-pressure burner systems.
    • Look closely at the photos to determine if you have elbow or straight orifices. Sabco begain using straight orifices in August, 2014.
  • This kit will help you convert your low-pressure, CSA-certified BrewMagic V350 system gas type from natural gas (NG) to propane (LP). Kit includes everything shown in the photo. There are several things to consider before ordering:
    • Only purchase this to retrofit BrewMagic V350 systems which are CSA certified and designed for low-pressure, banjo-style burners.
    • This is not for use with BrewMagic 2X, BrewMagic XL, BrewMagic Pilot or BrewMagic Pro.
    • This is not for use with any high-pressure burner systems.
    • Look closely at the photos to determine if you have elbow or straight orifices. Sabco begain using straight orifices in August, 2014.
  • This is a package of 3 buna gaskets for tri-clamps. Use these gaskets to fit ferrules with 2" OD. This ferrule size is commonly used with both 1" and 1.5" ID tri-clamp fittings. These are the very same gaskets you will find on BrewMagic equipment with thermometer connections. Sold in packages of 3. For example, ordering quantity of 2 will give you 6 gaskets.
  • This is a tri-clamp kit, including 2 clamps and 2 gaskets. Out tri-clamps are heavy-duty and higher quality than a lot of what you'll find out there. Other sizes are available, as well. Look for links below.
  • Use this adapter to modify a keg coupler to accept your 1/2" tri-clamp hoses. Includes tailpiece and black buna gasket. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
  • This adapter will help you convert the threaded fittings on your pump to sanitary tri-clamp. Once you have converted your pump to tri-clamp fittings you'll be able to easily connect and disconnect your hoses. Package of 1 adapter. We know the picture shows 2 but they are sold individually.
  • This kit allows you to fill your Corney keg with beer from your fermenter without opening the top port and risking contamination. Beer will fill your Corney keg from the bottom up through the dip tube on the liquid out side. The kit includes everything shown in the picture except the hose The hose is pictured in order to demonstrate the connections. Hose can be purchased separately. See link below. If you are ready to upgrade from Corneys, see our link below for PubJug.
  • This adapter will fit a 1/2" female NPT connection and convert it to tri-clamp. Easily connect and disconnect hoses once you convert. Adapters are sold individually.
  • This is a tri-clamp 90° elbow. The tri-clamp ferrules are 1/2". We use the small version on the top of our Sabco Fermenters to provide a stable mount for valves. We're sure you'll have other interesting ideas for them, too. We make these in two different sizes. The small elbow has a radius of 2 3/16". The large elbow has two different extension lengths. One is 3 3/8" and the other is 4".
  • This is a package of 3 buna gaskets for 4" tri-clamps. These are the gaskets Sabco uses on products such as PubJug, Sabco Fermenters and Sabco Bright Vessels Sold in packages of 3. For example, ordering quantity of 2 will give you 6 gaskets.
  • This kit gives you everything you need to turn a regular hose into a sanitary, tri-clamp hose. You'll receive 2 stainless tri-clamp ferrules and two stainless hose clamps.
  • This is a very high quality thermometer with tri-clamp connection. Features include:
    • Large 3" dial with bold, bright characters for easy reading
    • Case, bezel and stem in 304 SS
    • Tri-clamp connection in your choice of either 3/4" or 1.5"
    • F° & C° in bold easy-to-read numerals
    • Solid metal construction with stainless probe
    • Hermetically sealed glass lens
    • Easy calibration using screw on back of dial body
    • Accuracy of +/-1% of full scale
    • Tri-clamp gasket included
    • Stem length on 1.5" TC version is 1-13/16"
    • Stem length on the 3/4" TC version is 1-5/16"
  • This keg coupler works with virtually all American keg valves. Commonly known as D-system. Features include:
    • Stainless steel body for durability and resistance to chemicals
    • Stainless steel handle fork for strength
    • Tin/nickel plated probe is resistant to chemicals and won't chip like chrome
    • Short handle is ideal for 1/2 bbl and 1/6 bbl kegs
    • Includes built-in pressure relief valve (55-65 psi)
    • Includes 3/8" barb for gas port (fits 5/16" ID gas hose)
    • Industry standard beer port
     
  • This GFCI plug is a safety device, perfect for wet environments. If you have a pump or electric heater being used, it's a good idea to plug it into a GFCI receptacle or use this plug. This plug is rated for 120 Volts, 15 Amps and includes a ground. This plug is the American, grounded, 3-prong version. We use it in our ChillWizard system.
  • This is the famous March 815 pump with a GFCI plug added. Rated for boiling temperatures. Includes rugged stainless steel pump housing and built-in bracket, 38" cord and GFCI plug. The March 815 has a larger impeller than most wort pumps which makes it easier to prime and avoids cavitation. Specifications:
    • 115 V AC
    • 1/25 Hp
    • Magnetic drive
    • Ryton impeller
    • Encapsulated ceramic magnet
    • Ceramic shaft
    • thrust bearings
    • Viton o-ring gasket
    • 316 SS hardware
    • Open fan cooled
    • Rated for liquid temperatures up to 250° F
  • The Dirty Gauge was invented by Steve Acord at Dirty Bucket Brewing Company in Woodinville, WA. This brilliant product accurately reads pressure during the carbonation process. You can attach the Dirty Gauge directly to the top of your Sabco Fermenter. Use this in conjunction with our carbonation stone and speed up the process considerably. Two options are available. The coupler thread option includes the gasket for the threaded nut. The tri-clamp option does not include a 1/2" tri-clamp gasket or clamp.