• Tri-Clamp thermometer for brewers

    Get a better view with our adjustable-angle tri-clamp thermometer.  It's adjustable from straight angle all the way to a 60° angle. Features include:
    • Large 3″ dial with bold, bright characters for easy reading
    • Case, bezel and stem in 304 SS
    • Tri-clamp connection in your choice of either 3/4" or 1.5"
    • F° & C° in bold easy-to-read numerals
    • Solid metal construction with stainless probe
    • Hermetically sealed glass lens
    • Easy calibration using screw on back of dial body
    • Accuracy of +/- 1% of full scale
    • Tri-clamp gasket included
  • Stainless steel Type-J thermocouple temperature sensor

    This is a stainless steel type-J thermocouple temperature sensor. It was used on BrewMagic V350 systems until 2013. If you are purchasing this as a replacement for the temperature sensor on your BrewMagic V350 system, please look carefully at what you currently have. If your temperature sensor has 2 wires, purchase this thermocouple. If your sensor has 3 wires, then you need to replace it with an RTD temperature sensor which can also be found on this site.
  • Tri-Clamp Brewer Hose

    $70.00$76.00
    Brewer hose with tri-clamp fittings included. Don't purchase them all separately like some sort of fool. This hose is 5 feet long and allows you to make a quick, sanitary connection between tri-clamp components. We pre-assemble everything for you with brewer hose, tri-clamp ferrules, stainless steel hose clamps, tri-clamps and gaskets. You'll save money by buying these components as a kit.
  • Oxygen Stone Assembly

    $70.00$130.00
    This is a 0.5 micron stone assembly to aerate your wort as it enters the fermenter. The end of the stone is threaded for easy removal and cleaning. Tri-clamp ready for easy removal and sanitary connection. Sabco uses this assembly on its famous ChillWizard system. This assembly is available in two ways:
    • Stone assembly with tri-clamp connection
    • Complete assembly with 1/4" brass barb along with the inline shut-off valve
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packs of 2. For example, ordering quantity 1 will give you 2 plates.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packages of 2. For example, ordering quantity 1 will give you 2 plates.
  • The Dirty Gauge was invented by Steve Acord at Dirty Bucket Brewing Company in Woodinville, WA. This brilliant product accurately reads pressure during the carbonation process. You can attach the Dirty Gauge directly to the top of your Sabco Fermenter. Use this in conjunction with our carbonation stone and speed up the process considerably. Two options are available. The coupler thread option includes the gasket for the threaded nut. The tri-clamp option does not include a 1/2" tri-clamp gasket or clamp.
  • Silicone Tubing

    $75.00$80.00
    Silicone tubing is ideal for high temperatures. This tubing is rated for -100°F to 500°F. Perfect for moving wort out of your boil kettle. Meets FDA standards and is tasteless and odorless. Available in 1/2" and  3/4" ID. Tubing is sold in lengths of 10 feet. For example, ordering a quantity of 2 will give you 20 feet. Other specifications:
    • Working pressure up to 10 psi
    • Odorless, tasteless and inert
    • Good insulating properties
    • Resists deterioration from ultraviolet light
    • NSF 51 listed
  • Sight Glass

    $80.00$140.00

    Small sight glass with sanitary tri-clamp fittings

    This small brewing sight glass is durable and sanitary. Notice the thickness of top and bottom plates. Easy to take apart for cleaning. Available as either sight glass only or as a kit designed to retrofit older BrewMagic V350 models that used a plastic tube as sight glass on mash inlet. You can connect this sight glass with a 1/2" or 3/4" tri-clamp connection.
  • Stainless steel sanitary tri-clamp cap, 4" with two 1/2" ports

    This 4" tri-clamp cap can be used to upgrade an older Sabco Fermenter to the current design. Two sanitary ports in the cap give you lots of options. On our Sabco Fermenter we use one for blow-off. The other port can be used to inject oxygen or COwith our Carb Wand. This lets you use your fermenter as a bright tank. Pro tip: Get this cap along with the Carb Wand and Dirty Gauge (links below) to carbonate very quickly right inside your fermenter or bright tank. This cap also includes 2 tri-clamps, 2 caps and 2 gaskets.
  • Sabco Carb Wand

    $100.00$135.00
    This is the best way to carbonate using your Sabco Bright vessels. You can also turn your Sabco Fermenter into a Bright tank. The Carb Wand can be inserted into your Sabco Fermenter or Bright using the 3/4" tri-clamp port in the top. Then, connect a bottle of COfor carbonating or oxygen for aerating. The 0.5 micron stone on the Carb Wand will get the job done quickly. For older Sabco Fermenters without the tri-clamp ports in the cap, purchase this Carb Wand along with the new Fermenter cap (see link below). Made of 304 SS. Includes shut-off valve and brass 5/16" barb.
  • 4″ Sankey Tri-Clamp Cap

    $110.00$135.00

    Sankey Valve in a 4" Tri-Clamp Cap

    Easily convert your 4" tri-clamp storage vessels to a standard D-system Sankey for simple cleaning or dispensing. This specially designed cap allows inspection of the interior with the simple removal of the tri-clamp. Take advantage of the convenient Sankey valve and then quickly extract the entire valve assembly to easily clean the inside. Important Note: A PRV (pressure relief valve) is needed for your coupler or tank. Serious personal injury may result if your pressure vessel does not include this.
  • Stainless steel chamber for RIMS beer brewing

    Stainless steel chamber for low-density heating element. No threads. All sanitary welding by the best welders around. Constructed of 304 SS, 15.13"L, 1.38"ID, 1.5" tri-clamp connection. Wort in/out tubing is 0.5"OD. Heating element sold separately. See link below.
  • It's always a good idea to have spare parts on hand. See links below for these other PlatePro parts. These plates are sold in packs of 6. For example, ordering quantity 1 will give you 6 plates.
  • March 815 High Temperature Home Brewing Pump

    This is the famous March 815 pump with stainless steel housing. The stainless housing is more rugged and rated for 250° F. The larger magnet and impeller design results in higher flow and makes priming easier. Sabco uses this pump on its ChillWizard system. This pump includes a cord but not a plug.
  • March 815 High Temperature Home Brewing Pump

    This is the famous March 815 pump with a GFCI plug added. Rated for boiling temperatures. Includes rugged stainless steel pump housing and built-in bracket, 38" cord and GFCI plug. The March 815 has a larger impeller than most wort pumps which makes it easier to prime and avoids cavitation. Specifications:
    • 115 V AC
    • 1/25 Hp
    • Magnetic drive
    • Ryton impeller
    • Encapsulated ceramic magnet
    • Ceramic shaft
    • thrust bearings
    • Viton o-ring gasket
    • 316 SS hardware
    • Open fan cooled
    • Rated for liquid temperatures up to 250° F
  • Sabco BrewMagic natural gas to propane conversion kit

    This kit will help you convert your low-pressure, CSA-certified BrewMagic V350 system gas type from natural gas (NG) to propane (LP). Kit includes everything shown in the photo. There are several things to consider before ordering:
    • Only purchase this to retrofit BrewMagic V350 systems which are CSA certified and designed for low-pressure, banjo-style burners.
    • This is not for use with BrewMagic 2X, BrewMagic XL, BrewMagic Pilot or BrewMagic Pro.
    • This is not for use with any high-pressure burner systems.
    • Look closely at the photos to determine if you have elbow or straight orifices. Sabco begain using straight orifices in August, 2014.
  • Sabco BrewMagic propane to natural gas conversion kit

    This kit will help you convert your low-pressure, CSA-certified BrewMagic V350 system gas type from propane (LP) to natural gas (NG). Kit includes everything shown in the photo. There are several things to consider before ordering:
    • Only purchase this to retrofit BrewMagic V350 systems which are CSA certified and designed for low-pressure, banjo-style burners.
    • This is not for use with BrewMagic 2X, BrewMagic XL, BrewMagic Pilot or BrewMagic Pro.
    • This is not for use with any high-pressure burner systems.
    • Look closely at the photos to determine if you have elbow or straight orifices. Sabco begain using straight orifices in August, 2014.