• Stainless steel elbow with sanitary 1/2" tri-clamp ferrule

    This little 90° elbow is versatile and you will think of many ways to use it. Specifications:
    • Short radius, approximately 2.75" x 3.5"
    • Includes 1/2" tri-clamp ferrule
    • Will easily connect to any tri-clamp hose
    • Sanitary welded
    • Durable and heavy-duty
  • Stainless steel sanitary cap kit for 1.5" tri-clamp

    Close any 1.5" tri-clamp ferrule with this clamp. Made of 304 SS. Kit contains:
    • Two 1.5" tri-clamp caps
    • Two 1.5" buna gaskets
  • Stainless steel Type-J thermocouple temperature sensor

    This is a stainless steel type-J thermocouple temperature sensor. It was used on BrewMagic V350 systems until 2013. If you are purchasing this as a replacement for the temperature sensor on your BrewMagic V350 system, please look carefully at what you currently have. If your temperature sensor has 2 wires, purchase this thermocouple. If your sensor has 3 wires, then you need to replace it with an RTD temperature sensor which can also be found on this site.
  • Stainless steel sanitary clamp kit for 1.5" tri-clamp

    This kit includes 2 heavy-duty 1.5" tri-clamps along with 2 FDA approved buna gaskets. This size fits 1.5" tri-clamp ferrules with 2" outside diameter.
  • Oxygen Stone Assembly

    $70.00$130.00
    This is a 0.5 micron stone assembly to aerate your wort as it enters the fermenter. The end of the stone is threaded for easy removal and cleaning. Tri-clamp ready for easy removal and sanitary connection. Sabco uses this assembly on its famous ChillWizard system. This assembly is available in two ways:
    • Stone assembly with tri-clamp connection
    • Complete assembly with 1/4" brass barb along with the inline shut-off valve
  • Stainless steel tri-clamp elbow for wort plumbing

    This is a tri-clamp 90° elbow. The tri-clamp ferrules are 1/2". We use the small version on the top of our Sabco Fermenters to provide a stable mount for valves. We're sure you'll have other interesting ideas for them, too. We make these in two different sizes. The small elbow has a radius of 2 3/16". The large elbow has two different extension lengths. One is 3 3/8" and the other is 4".
  • Stainless steel lid for BrewMagic V350 kegs

    This stainless steel lid can be used as a replacement for any BrewMagic V350 system vessel. In fact, it will fit any 12" diameter opening.
  • Sabco BrewMagic propane to natural gas conversion kit

    This kit will help you convert your low-pressure, CSA-certified BrewMagic V350 system gas type from propane (LP) to natural gas (NG). Kit includes everything shown in the photo. There are several things to consider before ordering:
    • Only purchase this to retrofit BrewMagic V350 systems which are CSA certified and designed for low-pressure, banjo-style burners.
    • This is not for use with BrewMagic 2X, BrewMagic XL, BrewMagic Pilot or BrewMagic Pro.
    • This is not for use with any high-pressure burner systems.
    • Look closely at the photos to determine if you have elbow or straight orifices. Sabco begain using straight orifices in August, 2014.
  • Stainless Steel Boil kettle whirlpool siphon for beer brewing

    Do you have a false bottom in your BrewMagic V350 kettle? Consider converting to a whirlpool siphon. It's easy to manually create a whirlpool in the small kettle on a BrewMagic V350 system if you have this tri-clamp siphon. After knockout, rotate your spoon around the perimeter of the kettle to turn the wort and create a cone of trub. You'll leave that stuff behind instead of clogging up your ChillWizard or transferring it to your fermenter. Made of 304 SS and sanitary welded with a tri-clamp connection.
  • Stainless steel carbonation stone for carbonating beer

    This is a replacement carbonation stone for use with the Sabco Carb Wand. Porous metal design  .005  (1/2 micron) 1/8" FIP connection Made of 304 SS
  • Sabco BrewMagic natural gas to propane conversion kit

    This kit will help you convert your low-pressure, CSA-certified BrewMagic V350 system gas type from natural gas (NG) to propane (LP). Kit includes everything shown in the photo. There are several things to consider before ordering:
    • Only purchase this to retrofit BrewMagic V350 systems which are CSA certified and designed for low-pressure, banjo-style burners.
    • This is not for use with BrewMagic 2X, BrewMagic XL, BrewMagic Pilot or BrewMagic Pro.
    • This is not for use with any high-pressure burner systems.
    • Look closely at the photos to determine if you have elbow or straight orifices. Sabco begain using straight orifices in August, 2014.
  • March 815 High Temperature Home Brewing Pump

    This is the famous March 815 pump with stainless steel housing. The stainless housing is more rugged and rated for 250° F. The larger magnet and impeller design results in higher flow and makes priming easier. Sabco uses this pump on its ChillWizard system. This pump includes a cord but not a plug.
  • Stainless steel RTD temperature sensor for brewing

    This is the RTD temperature sensor used on all current BrewMagic systems. It was also used on V350 systems beginning in 2013. RTD sensors provide accurate temperature data to digital controllers such as those used on BrewMagic systems. These RTD sensors have the following specifications:
    • Made of 304 SS
    • 100 ohms
    • 3-wire design for increased accuracy
    • 1/4" diameter
    • 3" probe length
    • Relief spring at probe to prevent damage
    • 12 feet of armored cable for durability in harsh environments
    This RTD (resistance temperature detector) provides accurate and stable information to your V350 Brew-Magic controller.  This will replace the existing one in your Brew-Magic System If you are purchasing this as a replacement for the temperature sensor on your BrewMagic, please look carefully at what you currently have. If your temperature sensor has 3 wires, purchase this RTD. If your sensor has 2 wires, then you need to replace it with a type-J thermocouple which can also be found on this site.
  • PRV pressure relief valve for modified kegs

    This is the replacement PRV for PubJugs and Sabco Bright Vessels.
    • 60 psi, non-adjustable
    • Made of nickel-plated brass
    • Includes a pull ring for pressure venting
    • 1/4" NPSM thread - straight threads, NOT TAPERED
    • Overall size =   1.5" x 1/2" + plus ring
    • Includes o-ring for sealing
  • Stainless steel tri-clamp thermowell for temperature reading

    This tri-clamp, sanitary thermowell can be used in place of the standard dial thermometer on your Sabco fermenter. Insert a temperature probe into the thermowell and connect it to a temperature controller. The thermowell connects easily to our Sabco fermenter. Just remove the tri-clamp thermometer and attach this. Specifications:
    • Connects via 1.5" tri-clamp
    • Will accept any type of probe with maximum OD of 1/4"
    • Made of 304 SS
    • Tube length is 9.25"
  • This adapter will help you connect hose to a threaded ball-lock coupler. Better than hose barbs which distort the hose and leave pockets that are very difficult to clean. Use ball-lock couplers, instead. Kit includes the adapter and a stainless steel hose clamp.
  • Stainless steel sanitary tri-clamp cap, 4" with two 1/2" ports

    This 4" tri-clamp cap can be used to upgrade an older Sabco Fermenter to the current design. Two sanitary ports in the cap give you lots of options. On our Sabco Fermenter we use one for blow-off. The other port can be used to inject oxygen or COwith our Carb Wand. This lets you use your fermenter as a bright tank. Pro tip: Get this cap along with the Carb Wand and Dirty Gauge (links below) to carbonate very quickly right inside your fermenter or bright tank. This cap also includes 2 tri-clamps, 2 caps and 2 gaskets.
  • Adapter - 1/2" hose to 1/2" male NPT for home brewing pump

    This is a swivel adapter to connect a 1/2" hose to any 1/2" male pipe thread (NPT). Use it to connect a hose to the inlet or outlet of a pump with 1/2" MIP inlet or outlet threads. The large grip-style nut makes it easy to snug up the adapter by hand without tools. This eliminates the possibility of damaging the o-ring by over-tightening with a wrench. This also allows an easy disconnect for cleaning. Kit contains one adapter (grip & tailpiece), o-ring, and hose clamp.
  • Silicone Tubing

    $75.00$80.00
    Silicone tubing is ideal for high temperatures. This tubing is rated for -100°F to 500°F. Perfect for moving wort out of your boil kettle. Meets FDA standards and is tasteless and odorless. Available in 1/2" and  3/4" ID. Tubing is sold in lengths of 10 feet. For example, ordering a quantity of 2 will give you 20 feet. Other specifications:
    • Working pressure up to 10 psi
    • Odorless, tasteless and inert
    • Good insulating properties
    • Resists deterioration from ultraviolet light
    • NSF 51 listed
  • This bleeder valve helps you easily prime your magnetic drive pump. Use the bleeder valve to vent air trapped in the hose on the inlet side of the pump. Sabco includes this valve with each ChillWizard chilling system. We didn't always include it, though, so if you have an older ChillWizard, this is a great upgrade. Made of stainless steel. See link below to order high-temperature silicone tubing to connect boil kettle to pump.
  • Tri-Clamp Brewer Hose

    $70.00$76.00
    Brewer hose with tri-clamp fittings included. Don't purchase them all separately like some sort of fool. This hose is 5 feet long and allows you to make a quick, sanitary connection between tri-clamp components. We pre-assemble everything for you with brewer hose, tri-clamp ferrules, stainless steel hose clamps, tri-clamps and gaskets. You'll save money by buying these components as a kit.
  • Stainless steel sanitary cap kit for 1/2" & 3/4" tri-clamp

    Close any 1/2" or 3/4" tri-clamp ferrule with this cap. Made of 304 SS. Kit contains:
    • 2 tri-clamp caps
    • 2 buna gaskets
  • These adapters are perfect for making any 3/4" to  1=1/2" TC connection
  • 1.5" tri-clamp Buna gaskets for brewing and other sanitary applications

    This is a package of 3 buna gaskets for tri-clamps. Use these gaskets to fit ferrules with 2" OD. This ferrule size is commonly used with both 1" and 1.5" ID tri-clamp fittings. These are the very same gaskets you will find on BrewMagic equipment with thermometer connections. Sold in packages of 3. For example, ordering quantity of 2 will give you 6 gaskets.