These are 1/2 barrel (15.5 gal) standard keg length (21.75") but can be cut down to fit smaller capacity kegs.
Sold in packages of 10 valves. For example, ordering a quantity of 2 will give you 20 valves.
- These are band new, drop-in, D-system, twin-lug American Sankey beer keg valves. They come equipped with o-ring. Keep a few of these backup valves on hand to minimize out-of-service kegs.
- Use this adapter to modify the female end of a Micromatic shut-off valve to accept your 1/2" tri-clamp hoses. It is also perfect for adding a shut-off valve between two tri-clamp hoses. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
- Use this adapter to modify a keg coupler to accept your 1/2" tri-clamp hoses. Includes tailpiece and black buna gasket. American D-system keg couplers and shut-off valves utilize a special non-standard thread size. A specific adapter is needed to convert the special thread for use with tri-clamp fittings.
- This is a set of couplers for ball-lock Corney kegs. Two types are available: threaded and barbed. The barb type will fit any standard 1/4" ID tubing. Simply use a hose clamp. The threaded type, though, is easier to disconnect. Couplers are sold in sets of two as shown in the photo. You’ll get the liquid-out and the gas-in coupling.
- This coupler will attach to any US Micromatic keg coupler. It will fit either the gas or beer side. Includes the hose barb, coupler nut and gasket Typically, you will want to choose 3/8" for the gas side and 1/2" for the beer side.
- This adapter will help you connect hose to a threaded ball-lock coupler. Better than hose barbs which distort the hose and leave pockets that are very difficult to clean. Use ball-lock couplers, instead. Kit includes the adapter and a stainless steel hose clamp.
- This keg coupler works with virtually all American keg valves. Commonly known as D-system. Features include:
- Stainless steel body for durability and resistance to chemicals
- Stainless steel handle fork for strength
- Tin/nickel plated probe is resistant to chemicals and won't chip like chrome
- Short handle is ideal for 1/2 bbl and 1/6 bbl kegs
- Includes built-in pressure relief valve (55-65 psi)
- Includes 3/8" barb for gas port (fits 5/16" ID gas hose)
- Industry standard beer port
- This ball valve has a keg coupler thread and is used to stop beer flow from a standard keg coupler. This thread will not fit a 1/2" outlet.
- You probably got a great deal on those used kegs but wouldn't you like to get rid of the name engraved in the dome? Use these labels to cover the engraved name. We make the silver crescents labels using the very same heavy-duty, laminated finish and adhesive that is used for permanent federal warning labels. They are also UV resistant and extremely durable. They can endure heat and cold as well as the caustics and other chemicals. Sold in packages of 100. For example, ordering a quantity of 2 will give you 200 keg engraving shields.
- This is a box of 2,000 keg caps. Choose your color. Made of durable plastic in bright colors. Vented, too. Sabco's keg caps are the very best available and are very popular nationally. Designed for use with standard Sankey valves and keg necks. They keep dirt and debris out of the keg prior to distribution and use.
- These spiral, stainless steel lock rings (also known as snap rings or retaining rings) will secure a Micromatic valve into the D-system, drop-in Sankey neck. Keep these on the shelf to ensure your kegs stay in service. These rings are specifically designed to fit certain valve types. Do not substitute them for other designs! Valves can be pressurized and must be properly secured within the keg neck for safety. Remove and install using a valve removal tool and lock ring knife (sold separately, links below) Sold in packages of 25. For example, ordering a quantity of 2 will give you 50 lock rings.
- Very useful tool for removal of North American, D-System Micromatic keg valves. Made of solid stainless steel, this removal tool is not messing around. Other useful keg tools and replacement parts are shown below.
- These knives help you remove the snap-ring that secures North American keg valves. Ordering quantity of 1 gives you a package of 3 knives. Valve removal tool sold separately. See link below
- This is a package of 50 o-rings for keg valves. Color may vary. An essential item for keg maintenance. Use these o-rings along with the correct spiral retaining ring to get out-of-service kegs back to work fast! You should have removal tools and extra valves on hand, as well. Links to these items can be found below. You'll want to make sure you choose the correct o-ring for your keg valve. To do so, first determine if you have drop-in, threaded, or camber valves. We can help:
- Drop-in valves are installed by dropping the valve into the keyed notches located near the upper edge of the keg neck. Once in place, a stainless, spiral, retaining ring is installed into the upper groove of the keg neck. This holds the valve in position and prevents tampering. Use this o-ring if you have drop-in valves.
- Camber valves are installed by twisting the valve into the keg neck, then a stainless retaining ring is installed into the upper groove of the keg neck to hold the valve in position. Use this o-ring if you have camber valves.
- Threaded valves screw into the neck. At the base of the valve is a flat gasket. These valves do not use o-rings. Unfortunately, we no longer carry these flat gaskets. Do NOT order the o-rings on this page.
PubJug beer and beverage serving kegs
Say goodbye to Corneys! PubJugs kegs with a North American Sankey valve and spear installed in a 4" tri-clamp cap. This makes them the perfect keg for serving many beverages. Dispense beer, cold brew coffee, cocktails, margaritas, wine, kombucha and more. Now available in two sizes! 1/2 bbl (about 15.5 gallon) and 1/6 bbl (about 5.75 gallon). Finally... A serving keg that's economical, easy to clean and compatible with North American Sankey equipment. Homebrewers can easily clean these kegs without sacrificing sanitary fittings. Slightly more expensive than Corney kegs but with lots of features:- 1/2 bbl (15.5 gal) stainless steel keg sizes available
- 4" tri-clamp, sanitary cap with tamper resistant closure for safety
- Includes drop-in, Sankey D-system valve
- 60 psi, pull-ring pressure relief valve with sanitary o-ring closure so beer does not touch threads
- Easy to extract the valve and PRV assembly for cleaning - the entire valve assembly can be taken directly to your sink for cleanup
- Simple upside down, manual, or automated clean out
- Cold-brew coffee
- Signature cocktails and margaritas in restaurants and bars
- Wine
- The Dirty Gauge was invented by Steve Acord at Dirty Bucket Brewing Company in Woodinville, WA. This brilliant product accurately reads pressure during the carbonation process. You can attach the Dirty Gauge directly to the top of your Sabco Fermenter. Use this in conjunction with our carbonation stone and speed up the process considerably. Two options are available. The coupler thread option includes the gasket for the threaded nut. The tri-clamp option does not include a 1/2" tri-clamp gasket or clamp.
- This is the ideal keg coupler for filling and cleaning. Compare this wash head coupler to standard couplers:
- Standard couplers have a small CO2 inlet. This coupler is large on both the gas and the beer side.
- Standard couplers have a check valve at either the inlet or outlet port. This coupler does not.
- Includes a shut-off ball valve at each port, allowing you to quickly turn off the source an move on to the next keg.
- Makes it easy to clean kegs upside-down.
- Easy to fill kegs either upright or upside-down.
- Includes hose barbs on each port for easy connection. Fits 1/2" ID hose.
